我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz ECC RDIMM HPE P19040-B21 memory upgrade

SKU CH-4Q7E-YF1T3

8GB DDR4 2933MHz ECC RDIMM registered server memory with CL21 latency and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 2933MHz ECC RDIMM expands server memory capacity
  • Registered design with ECC maintains data integrity under load
  • CL21 latency at 1.2V balances speed and power efficiency
  • 288-pin 1Rx8 module built with major OEM Samsung Micron Hynix chips
  • Validated for HPE P19040-B21 compatible systems ensures drop-in fit

HPE-compatible DDR4 ECC RDIMM

This 8GB DDR4 2933MHz registered DIMM is built for HPE servers and workstations that require ECC error correction. It operates at 1.2V with CL21 latency and uses a 288-pin RDIMM form factor. The module is validated for systems referencing the HPE P19040-B21 part number.

Suited for registered-memory platforms only

IT administrators upgrading compatible HPE hardware will find this single-rank 1Rx8 module a direct fit. Buyers needing unbuffered UDIMM memory for consumer motherboards cannot use this registered design. Systems limited to lower DDR4 speeds or non-ECC configurations should look at alternative memory types.

Registered ECC with 1Rx8 organisation

The single-rank registered architecture with on-die ECC is the specification that determines compatibility. It requires a motherboard chipset and BIOS that support registered DDR4 modules at 2933MHz. Verify your platform documentation for RDIMM support and maximum capacity per slot before purchasing.

商品特色

  • 8GB DDR4 2933MHz ECC RDIMM expands server memory capacity
  • Registered design with ECC maintains data integrity under load
  • CL21 latency at 1.2V balances speed and power efficiency
  • 288-pin 1Rx8 module built with major OEM Samsung Micron Hynix chips
  • Validated for HPE P19040-B21 compatible systems ensures drop-in fit

商品規格

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

商品問答

How do I install the 288-PIN DDR4 RDIMM and which slot-population rule do I follow?

Power down the HPE server, open the chassis, align the module key with the DIMM slot, press firmly until both ejector clips lock, then populate slots in the order shown in the server's service guide to match the 1Rx8 rank layout.

Will the Samsung, Micron or Hynix chips on this module need any firmware updates or scheduled replacement?

The DRAM chips are sealed components with no user-serviceable firmware; they require no scheduled replacement under normal server operating conditions.

At what point does the CL21 latency at 2933 MT/s become the bottleneck during sustained workloads?

Under continuous heavy memory traffic the fixed CL21 timing at 2933 MT/s limits throughput before thermal or voltage constraints appear.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。