我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 4800 576GB (6x96GB) CL40 2Rx4 ECC RDIMM 1.1V 288-pin Supermicro H14SSF

SKU CH-MGTD-CCTRR

Six 96 GB DDR5 RDIMMs deliver 576 GB of registered ECC memory at 4800 MT/s, CL40, 1.1 V for the Supermicro H14SSF

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5-4800 speed with CL40 latency at 1.1 V for efficient data throughput
  • Registered ECC RDIMM design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin 2Rx4 form factor matches Supermicro H14SSF motherboard memory population rules
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise-grade reliability

Exact-match upgrade for Supermicro H14SSF

This 576GB kit delivers six 96GB DDR5 4800 RDIMM modules built to the precise rank, voltage and timing the server memory controller expects. Registered ECC architecture ensures every slot runs fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's physical and electrical requirements exactly.

Thermals, noise and power in normal use

Operating at 1.10V, each module draws minimal power and generates little heat without a heat spreader. Registered buffering reduces electrical load on the memory controller, helping system fans stay quiet under sustained workloads. The CL40 latency at 4800 MT/s keeps throughput steady for typical server tasks.

What the bundle changes for you

The kit supplies the complete 576GB capacity in a single validated package, removing the risk of mixing incompatible ranks or voltages. Lifetime replacement coverage and free US-based technical support back the installation. Buyers who need a different total capacity or a UDIMM form factor should look elsewhere.

商品特色

  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5-4800 speed with CL40 latency at 1.1 V for efficient data throughput
  • Registered ECC RDIMM design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin 2Rx4 form factor matches Supermicro H14SSF motherboard memory population rules
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 6x96GB DDR5 4800 RDIMM kit in the Supermicro H14SSF, and what step is often missed?

Follow the H14SSF manual for the exact DIMM population order; the common mistake is skipping the prescribed slot sequence, which prevents the 576GB kit from being recognised at full capacity and rated speed.

What maintenance or replacement will the 288-pin DDR5 ECC RDIMM modules need over time?

No routine maintenance is required; ECC corrects single-bit errors on the fly, and if a module ever fails the lifetime replacement warranty covers a direct swap.

What limit appears first when the 2Rx4 1.1V DDR5 4800 kit runs sustained workloads on the H14SSF?

The memory controller's maximum supported capacity and population rules are the first limit; the kit is spec-matched to the board so it runs at CL40 4800MT/s across all six slots without downclocking.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。