我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 384GB (4×96GB) CL40 1.1V memory upgrade

SKU CH-9ET6-DAS2V

384 GB DDR5-4800 ECC registered kit (4 × 96 GB, CL40, 1.1 V, 2Rx4) for Supermicro H13SST-GC motherboards

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity across four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on compatible platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation reduces power draw per module at full load
  • 288-pin RDIMM form factor matches Supermicro H13SST-GC memory slots exactly

Exact-fit DDR5 kit for Supermicro H13SST-GC

This 384 GB kit contains four 96 GB DDR5-4800 registered ECC RDIMMs. Each module runs at 1.1 V with CL40 latency and a 2Rx4 organisation. The kit is built for servers that require registered memory with error correction.

Installation follows standard RDIMM rules

Align the 288-pin modules with the motherboard slots and press until the latches click. Populate the slots in the order specified by the Supermicro manual to avoid a no-post condition. Mixing ranks or voltages can prevent the system from recognising the full capacity.

DDR5-4800 bandwidth caps peak throughput

The PC5-38400 rating sets the maximum data rate at 4800 MT/s per pin. Registered buffering adds a small latency overhead but allows full population without signal degradation. ECC correction handles single-bit errors without reducing usable bandwidth.

商品特色

  • 384 GB total capacity across four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on compatible platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation reduces power draw per module at full load
  • 288-pin RDIMM form factor matches Supermicro H13SST-GC memory slots exactly

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How can I confirm the kit is running at DDR5 4800 with CL40 after installing it in my Supermicro H13SST-GC?

Check the BIOS memory information or a tool like dmidecode; it should show each module at 4800 MT/s, 1.10 V, CAS latency 40, and the full 384 GB recognised across the four slots.

What exactly ships in the box and is anything else required to complete the upgrade?

The package contains the four 96 GB DDR5 4800 ECC Registered RDIMMs — nothing else is included and no additional parts are needed for a compatible Supermicro H13SST-GC motherboard.

This kit is only offered as 384 GB (4 × 96 GB); how do I decide if that capacity is right for my workload?

Choose the 384 GB kit when your Supermicro H13SST-GC supports full population of four 2Rx4 Registered DIMMs and your applications need the maximum registered ECC capacity this board allows.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。