我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600MHz 128GB 2x64GB ECC RDIMM Supermicro X14SDW-72C-SP9F memory upgrade

SKU CH-MD70-E9WJD

A 128 GB DDR5 kit of two 64 GB ECC Registered RDIMMs running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X14SDW-72C-SP9F motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

顯示另外 4 款選項
  • 128GB total capacity from two 64GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro X14SDW-72C-SP9F

128 GB DDR5-5600 kit for Supermicro X14SDW-72C-SP9F

This 128 GB kit contains two 64 GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro X14SDW-72C-SP9F motherboard. It targets server administrators who need exact-spec memory that the board recognises at full capacity and rated speed without manual tuning. Buyers who want non-ECC or unbuffered modules should look elsewhere.

Registered RDIMM form factor

Each module uses a 288-pin Registered RDIMM design that offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s. The 1.1 V operating voltage and CL46 latency match the board's native timing table. No heat spreader is fitted, so airflow in the chassis must be sufficient for continuous server workloads. Builders needing UDIMM or SODIMM form factors cannot use this kit.

Two-module kit with lifetime replacement coverage

The package delivers exactly two 64 GB RDIMMs pre-matched as a 128 GB set, eliminating the risk of mixed-rank or mixed-voltage populations. Lifetime replacement coverage and free US-based technical support back the modules after installation. No additional software, cables or mounting hardware are included. Administrators who require larger single-module capacities or different rank configurations must select another part.

商品特色

  • 128GB total capacity from two 64GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro X14SDW-72C-SP9F

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the DDR5 5600 PC5-44800 interface run at the full 5600 MT/s on the Supermicro X14SDW-72C-SP9F?

Yes, the kit is spec-matched to the board's memory controller so the 2Rx4 registered ECC modules are recognised at the rated DDR5 5600 speed with CL46 timing.

What physical slot and form factor do these modules need on the Supermicro X14SDW-72C-SP9F?

They require standard 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM, and the kit provides two 64 GB modules for a 128 GB total.

What is the correct installation order for the two 64 GB RDIMMs on this motherboard?

Consult the Supermicro X14SDW-72C-SP9F manual for the approved DIMM population sequence; the common mistake is inserting modules in the wrong slot pair, which prevents the system from recognising the full 128 GB capacity.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。