我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 5600MHz 192GB 12x16GB ECC RDIMM CL46 1.1V Supermicro H14DST-F memory upgrade

SKU CH-BN4Y-5WVC8

A 192GB DDR5 ECC RDIMM kit of twelve 16GB modules at 5600MHz CL46 1.1V, validated for the Supermicro H14DST-F motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB capacity across 12 matched 16 GB modules for maximum server density
  • DDR5 5600 MT/s speed rated at PC5 44800 for high-throughput workloads
  • Registered ECC RDIMM design with 1Rx8 organisation offloads the controller and corrects single-bit errors
  • 1 V operation at CL46 timing matches the Supermicro H14DST-F memory controller exactly
  • 288-pin RDIMM form factor verified for the H14DST-F motherboard population rules

192 GB DDR5 ECC RDIMM kit for Supermicro H14DST-F

This 192 GB kit contains twelve 16 GB DDR5 5600 MHz registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. It targets administrators who need full-capacity population across every slot without compatibility guesswork.

Registered architecture offloads the memory

Each 288-pin RDIMM runs at 1.1 V with CL46 latency, allowing all twelve slots to operate fully populated at the rated 5600 MT/s speed. The registered design reduces electrical load on the controller while on-die ECC corrects single-bit errors before they affect production workloads.

Twelve modules fill every DIMM slot on the board

The kit matches the motherboard’s required 288-pin RDIMM form factor and population rules, so no UDIMM or SODIMM alternatives will fit. Verify the system manual for approved capacity limits and installation order before adding this memory to your configuration.

商品特色

  • 192 GB capacity across 12 matched 16 GB modules for maximum server density
  • DDR5 5600 MT/s speed rated at PC5 44800 for high-throughput workloads
  • Registered ECC RDIMM design with 1Rx8 organisation offloads the controller and corrects single-bit errors
  • 1 V operation at CL46 timing matches the Supermicro H14DST-F memory controller exactly
  • 288-pin RDIMM form factor verified for the H14DST-F motherboard population rules

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 12 DDR5 RDIMM modules into the Supermicro H14DST-F, and which population step is most often missed?

Populate all 12 slots following the motherboard manual’s exact DIMM-population order; the step most often missed is verifying the required sequence for a fully populated 1Rx8 configuration before powering on.

What maintenance or replacement will this 192GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors automatically, and only a failed module would need replacement under the lifetime warranty.

What limit appears first when the 12x16GB DDR5-5600 CL46 kit runs sustained workloads on the H14DST-F?

The memory controller’s maximum supported capacity and population rules for 1Rx8 Registered DIMMs are the first limit; thermal throttling can occur if chassis airflow is insufficient for 12 modules at 1.1V.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。