我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
A green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD17000-418K1 4GB DDR4 2133 CL15 memory upgrade

SKU CH-B339-14T50

Adds 4 GB of DDR4 2133 CL15 memory at 1.2 V via 288-pin UDIMM for Hynix-compatible systems

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system specifications
  • CL15 latency keeps data access snappy
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop slots

System-specific DDR4 upgrade

This NEMIX RAM module adds 4 GB of DDR4 2133 memory to compatible Hynix-based desktops. It uses a single 288-pin UDIMM running at 1.2 V with CL15 latency and a 1Rx8 rank configuration.

Thermals and power in daily use

The stick operates at the standard 1.20 V DDR4 voltage without a heat spreader. Unbuffered, non-ECC design keeps power draw low and noise non-existent during typical desktop workloads.

Replaces slower or smaller DDR4 DIMMs

Swapping out a lower-capacity or lower-frequency DDR4 module for this 4 GB PC4-17000 unit is worthwhile when the board supports 2133 MT/s and the system needs a simple capacity boost. It does not suit builds requiring ECC, registered memory or speeds above 2133 MT/s.

商品特色

  • 4GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system specifications
  • CL15 latency keeps data access snappy
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop slots

商品規格

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-418K1
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2133MHZ PC4-17000 1Rx6 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

商品問答

How do I install this 288-pin DDR4 UDIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click shut, then verify the system sees 4 GB at 2133 MHz in BIOS.

What maintenance or replacement will this 1.2 V non-ECC module need later?

No scheduled maintenance is required; if errors appear, replace the stick — there are no user-serviceable parts.

What limit appears first when this CL15 2133 MHz kit runs sustained workloads?

The JEDEC 1.2 V voltage ceiling and CL15 latency bound throughput before thermal throttling becomes a factor.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。