我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green circuit boards with black chips and gold pins lying flat

NEMIX RAM

NEMIX RAM MD44800-618K4 64GB (4x16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade

SKU CH-RF03-D4A3E

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V unbuffered UDIMM modules validated for the Supermicro X13SAE-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Validated for Supermicro X13SAE-F motherboard for guaranteed compatibility

Exact-match DDR5 kit for Supermicro X13SAE-F

This 64GB kit contains four 16GB DDR5 5600 UDIMMs rated at CL46 and 1.10V. The modules are non-ECC, unbuffered and built with major OEM chips from Samsung, Micron or Hynix. They are spec-matched to the motherboard so the memory controller recognises the full capacity at the rated speed.

Four 288-pin slots required, no heat spreader

The kit occupies all four DIMM slots on the Supermicro X13SAE-F and follows the board's population rules. No extra cooling hardware is needed because the modules ship without a heat spreader. Each stick is a 1Rx8 single-rank design that keeps the electrical load predictable for the platform.

Replaces slower or smaller DDR5 kits on the same

If the system currently runs lower-speed DDR5 or fewer modules, this kit raises the total to 64GB at the board's native 5600MT/s rate. The jump is worthwhile when the workload needs the full capacity and the rated CL46 timing. It is not for builds that require ECC, registered modules or a different DDR generation.

商品特色

  • 64 GB total capacity from four 16 GB modules for high-density multitasking
  • DDR5 5600 speed with CL46 latency for responsive data throughput
  • 1 V operation reduces power draw and heat output
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Validated for Supermicro X13SAE-F motherboard for guaranteed compatibility

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What is the first limit reached under sustained use with 1.10V and CL46 timing?

The modules run at 1.10V with CL46 latency, so voltage and timing are the primary limits during continuous operation.

How much heat or noise do four 1Rx8 DDR5 UDIMMs produce when running all day at 5600MHz?

These unbuffered DDR5 UDIMMs have no heat spreader and no moving parts, so they generate minimal heat and zero audible noise at rated speed.

What motherboard slot and population rule must I already have for this 4x16GB kit to work?

You need a Supermicro X13SAE-F motherboard with four 288-pin DDR5 UDIMM slots populated in the order the manual specifies.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。