我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small black square 40x20mm fan with three wires

OEM Industries

OEM Industries AD0412LB-C52 40x20mm 12V 0.11A CPU cooler

SKU CH-WJX8-RNT64

A 40 mm square fan with ball bearing and three-pin 12 V power for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • LEDNo
  • Compact 40 mm frame fits tight builds
  • Ball bearing ensures long service life
  • 12 V 0.11 A draws minimal power
  • Three-wire tachometer enables speed monitoring
  • 40 x 20 mm footprint suits small-form-factor cases

Compact 40 mm cooler for tight builds

The AD0412LB-C52 is a 40 by 20 mm fan-only cooler that runs on 12 V at 0.11 A through a three-pin connector. Its ball bearing and black frame suit small-form-factor cases or inverter modules where height is limited.

Suits low-profile chassis, not high-heat CPUs

Builders fitting a 1U server, thin client or embedded board will appreciate the slim 20 mm profile and standard three-wire hookup. Systems with high-TDP desktop processors or overclocked chips should look elsewhere because the cooler provides no heatsink mass or heatpipes.

Drops into any 40 mm mount with three-pin power

The unit needs a 40 mm mounting grid and a motherboard or controller header that supplies 12 V on a three-pin plug. It frees vertical clearance above the socket and leaves surrounding RAM slots and VRM heatsinks unobstructed.

商品特色

  • Compact 40 mm frame fits tight builds
  • Ball bearing ensures long service life
  • 12 V 0.11 A draws minimal power
  • Three-wire tachometer enables speed monitoring
  • 40 x 20 mm footprint suits small-form-factor cases

商品規格

ModelAD0412LB-C52
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
LEDNo

商品問答

What fan header does my motherboard need for the 3-pin connector on this AD0412LB-C52?

A standard 3-pin or 4-pin fan header supplies the 12 V and tachometer signal this cooler requires.

Will the 40 mm frame fit in the same mounting holes as my existing 4020 fan?

Yes, the 40x20 mm dimensions match the 4020 standard, so existing screw holes line up directly.

How can I confirm the ball-bearing fan is spinning at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report a steady value from the third wire.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。