我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 60mm PWM fan with four-pin connector and ball bearing

OEM Industries

OEM Industries SHBC0612HB 60mm 12V 0.18A 4-pin PWM CPU cooler

SKU CH-BB8P-FAWQY

A 60 mm PWM fan with dual ball bearings and a 4-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 60 mm fan fits compact CPU coolers and tight case layouts
  • 12 V 0.18 A draw keeps power load low for small-form-factor builds
  • Dual ball bearing reduces wear and extends operating life
  • 4-pin PWM connector enables automatic speed control from the motherboard
  • Fan-only design lets you pair it with any compatible heatsink

Compact 60 mm PWM fan

The OEM Industries SHBC0612HB is a 60 mm square fan with a 4-pin PWM connector that runs on 12 V and draws 0.18 A. It uses a dual ball-bearing design for consistent rotation and has no integrated lighting. The unit is sold as a fan only, without a heatsink or mounting hardware.

Suited for tight clearance builds

This fan fits small-form-factor cases and low-profile coolers where a 60 mm frame is the maximum allowed size. The PWM wire lets the motherboard control speed automatically, so noise stays low at idle. Builders who need higher static pressure for dense radiators or larger heatsinks should look at bigger frame sizes instead.

Airflow headroom for light loads

At 12 V the motor draws 0.18 A, which is typical for a low-power 60 mm fan and provides enough airflow for modest thermal loads such as office CPUs or auxiliary case ventilation. Under sustained heavy loads the smaller blade area and limited pressure will reach their limit quickly, so the fan is not intended for high-TDP processors or overclocked configurations.

商品特色

  • 60 mm fan fits compact CPU coolers and tight case layouts
  • 12 V 0.18 A draw keeps power load low for small-form-factor builds
  • Dual ball bearing reduces wear and extends operating life
  • 4-pin PWM connector enables automatic speed control from the motherboard
  • Fan-only design lets you pair it with any compatible heatsink

商品規格

ModelSHBC0612HB
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

商品問答

Does my motherboard need a 4-pin PWM header to run the SHBC0612HB fan?

Yes, the SHBC0612HB uses a 4-pin PWM connector, so your motherboard or fan controller must provide a matching 4-pin header for speed control and monitoring.

Can I replace the stock 60 mm fan on an older heatsink with this 12 V 0.18 A ball-bearing model?

The SHBC0612HB is a 60 mm frame with 4-wire PWM and dual ball bearings, so it will fit any cooler or case mount designed for a standard 6015 fan footprint.

How can I verify the SHBC0612HB is reporting speed correctly after installation?

Enter the BIOS or open a hardware-monitoring utility and confirm the fan RPM readout changes smoothly as the PWM duty cycle ramps up and down.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。