我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR4 2400 CL17 1Rx8 UDIMM QNAP TS-677/832 series

SKU CH-Y32C-BWHR5

Adds 8GB of DDR4 2400 CL17 memory to compatible QNAP TS-677 and TS-832 series NAS units

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • Boosts NAS responsiveness with 8 GB DDR4 2400 CL17 module
  • JEDEC-standard 1.2 V unbuffered DIMM ensures warranty-safe upgrade
  • Single 1Rx8 288-pin stick installs in minutes without tools
  • Backward compatible with 2133 MHz systems for flexible deployment
  • Replaces QNAP part numbers RAM-8GDR4A0-UD-2400 and RAM-8GDR4A1-UD-2400

OWC 8GB DDR4 2400 UDIMM for QNAP NAS

This 8GB DDR4 2400 CL17 UDIMM module is built for QNAP TS-677, TS-832PXU, TS-832PXU-RP, TS-832XU and TS-832XU-RP systems. It replaces QNAP part numbers RAM-8GDR4A0-UD-2400 and RAM-8GDR4A1-UD-2400. The module suits administrators expanding memory in these specific NAS units. Buyers needing ECC registered memory or capacities beyond 8GB per slot cannot use this part.

Installation is a standard UDIMM insertion

The 288-pin unbuffered DIMM fits the memory slots on the listed QNAP models without tools. Align the notch, press firmly until the retention clips click, then power on to verify the new capacity. The most common issue is seating the module incompletely, which leaves the system showing the original memory total. Reseating usually resolves this. No BIOS configuration is required on these appliances.

The decisive specification is 1Rx8 CL17 at 1.2V

This single-rank by eight organisation with CL17 latency matches the OEM timing the QNAP firmware expects. The JEDEC-standard 1.2V operation ensures compatibility with the platform's memory controller. Systems requiring dual-rank modules, lower latency bins or 1.35V operation will not work correctly with this module. Backward compatibility with 2133MHz buses is supported.

商品特色

  • Boosts NAS responsiveness with 8 GB DDR4 2400 CL17 module
  • JEDEC-standard 1.2 V unbuffered DIMM ensures warranty-safe upgrade
  • Single 1Rx8 288-pin stick installs in minutes without tools
  • Backward compatible with 2133 MHz systems for flexible deployment
  • Replaces QNAP part numbers RAM-8GDR4A0-UD-2400 and RAM-8GDR4A1-UD-2400

商品規格

BrandOWC
Part Number2U4D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-677
QNAP TS-832PXU
QNAP TS-832PXU-RP
QNAP TS-832XU
QNAP TS-832XU-RP

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How can I confirm the module is running at 2400MHz CL17 after installing it in my TS-832XU?

Open the QNAP system information page or BIOS; the memory section should report DDR4 2400 (PC4-19200) with a CAS latency of 17 for the new module.

What comes in the package and do I need any extra parts to fit it into a TS-677?

The box contains one 8GB 288-pin DDR4 UDIMM; no additional brackets, cables or tools are required for installation.

Should I pick the 8GB 1Rx8 CL17 stick or look for a different rank or latency for my TS-832PXU?

This 8GB 1Rx8 CL17 module matches the QNAP part numbers RAM-8GDR4A0-UD-2400 and RAM-8GDR4A1-UD-2400, so it is the correct specification for those models.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。