我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four 1.75 mm silk PLA spools in green red yellow blue

PrintOxe

PrintOxe PLA like SILK Filament 4 Pack 1.75mm 1kg Each Green Red Yellow Blue +/-0.03mm

SKU CH-RB11-N2KDW

Four spools of 1.75 mm silk PLA in green, red, yellow and blue totalling 8.8 lb with ±0.03 mm accuracy

  • TypeFilament
  • High-gloss silk finish creates shiny prints
  • Precise ±0.03 mm diameter ensures consistent extrusion
  • Four colours included — green, red, yellow, blue
  • Vacuum-sealed with desiccant protects against moisture
  • 75 mm diameter fits popular 3D printers

Four-colour silk PLA filament pack

This set contains four 1 kg spools of 1.75 mm PLA filament in green, red, yellow and blue. The silk-formula material produces a high-gloss surface finish on printed parts. Total net weight across the pack is 8.8 lbs. Each spool is vacuum-sealed with desiccant to protect against moisture.

Low-warp printing with standard temperatures

The filament is made from 100 % new high-purity corn-starch-based PLA, giving minimal warping and shrinkage. Recommended nozzle temperature ranges from 200 °C to 220 °C (392 °F to 428 °F). Dimensional accuracy is held to ±0.03 mm, which reduces the risk of clogging or blistering during normal printing.

Consistent feed for long print jobs

Spool dimensions are 7.88 in diameter, 2.69 in width with a 2.20 in hub hole, fitting common printer holders. The tight tolerance and dry packaging help maintain steady extrusion over extended builds. Compatible with a wide range of popular desktop 3D printers.

商品特色

  • High-gloss silk finish creates shiny prints
  • Precise ±0.03 mm diameter ensures consistent extrusion
  • Four colours included — green, red, yellow, blue
  • Vacuum-sealed with desiccant protects against moisture
  • 75 mm diameter fits popular 3D printers

商品規格

BrandPrintOxe
ModelPLA like SILK
TypeFilament

商品問答

How do I load the 1.75mm spool and avoid the common mistake?

Mount the spool on the holder, feed filament into the extruder, and preheat the nozzle to 200°C–220°C. The step users often miss is drying the vacuum-sealed spool if it absorbed moisture after opening.

What maintenance will the silk PLA need over time?

Keep unused spools in sealed bags with desiccant to prevent moisture uptake. Clean the nozzle between colour changes to avoid silk-particle buildup, and replace the PTFE tube if it shows wear from the slightly abrasive finish.

What limit appears first during long prints?

The +/-0.03mm diameter tolerance can cause occasional under-extrusion on very long runs, and the silk surface may highlight layer lines more than standard PLA.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。