我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Grey ATX power supply with 80mm fan, reduced depth 5.9 x 3.4 inches, 2.5kg

Replace Power

Replace Power RPSU-C99-2 ATX power supply 115/230V 80mm fan 2.5kg

SKU CH-KRVC-QP868 MPN RPSU-C99-2

ATX power supply with 80 mm fan, switchable 115/230 V input, SATA and ATX connectors, and reduced 5.9" depth for legacy HP Pavilion models

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for multiple HP Pavilion models
  • Switchable 115 / 230 V input suits global mains
  • Compact 5.9" depth eases fit in tight cases
  • 80 mm fan delivers active cooling under load
  • Over-current, over-power and over-voltage protection safeguards components

Direct Replacement for HP Pavilion Systems

This Replace Power RPSU-C99-2 ATX power supply is built as a direct replacement for specific HP Pavilion models including the a1511kr, a1512x, a1514n, a1517x, a1450n, a1467c and a1523w. It accepts 115 or 230 V input via a manual switch and uses a single 80 mm fan for cooling. The unit weighs 2.5 kg and measures 5.9 inches in height by 3.4 inches in width.

Restores Power to Legacy Desktops

It replaces an original supply that has failed or cannot support added components such as extra drives. The reduced depth improves fit inside compact HP chassis where standard ATX units may not seat properly. Over current, over power and over voltage protection circuits help safeguard the motherboard and attached peripherals. The upgrade is worth it when the original unit shows instability or lacks the connectors a newer configuration requires.

Straightforward Swap with Standard ATX Mounting

Installation follows a standard ATX mounting pattern using four screws at the rear of the case. The connector set includes one SATA, one 20+4 pin ATX, one 12 V ATX, two large peripheral plugs and one 6-inch small peripheral plug. The most common issue is forgetting to set the 110 V or 220 V switch to match the local mains voltage before powering on. Cable lengths are fixed, so verify reach to the motherboard and drive bays in the target chassis.

商品特色

  • Direct replacement for multiple HP Pavilion models
  • Switchable 115 / 230 V input suits global mains
  • Compact 5.9" depth eases fit in tight cases
  • 80 mm fan delivers active cooling under load
  • Over-current, over-power and over-voltage protection safeguards components

商品規格

BrandReplace Power
ModelRPSU-C99-2
ColorGrey
TypeATX
Fans1
Weight2.5

商品問答

Will the 5.9 inch height and 3.4 inch width fit my HP Pavilion a1511kr case?

The unit measures 5.9 inches high by 3.4 inches wide with a reduced depth design for increased compatibility in older HP Pavilion models including the a1511kr.

How do I set the 115/230V input switch correctly during installation?

Before connecting the ATX and 12V power cables, slide the voltage selector to 115V or 230V to match your local mains supply; the step most often missed is verifying the switch position after mounting.

When should I clean or replace the 80mm cooling fan?

Vacuum dust from the 80mm fan intake every six to twelve months; if bearing noise appears or airflow drops, replace the entire power supply as the fan is not user-serviceable.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。