EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Replace Power
420W ATX power supply with 20+4 pin motherboard connector, SATA, Molex and 12V ATX plugs, switchable 110V/220V input and 80mm cooling fan
This Replace Power unit is a 420W ATX supply built to fit HP Media Center models such as the m7250, m7250la, M7250N, m7434n, m7457c and m7463w. It serves owners who need a direct swap for a failed original unit. Builders working with standard ATX cases or non-HP motherboards should look elsewhere because the connector layout targets these specific chassis.
The bundle provides one SATA connector, a 20+4 pin motherboard plug, a dedicated 12V ATX lead, two large peripheral connectors and two short large peripheral connectors plus one small peripheral connector. An 110V/220V input selector lets the unit operate on either mains standard without extra configuration.
At 420W the supply handles typical office workloads, integrated graphics and a single mechanical drive with headroom to spare. It runs out of steam when a discrete graphics card or multiple drives are added, and the single 80mm fan cannot move enough air for sustained heavy loads.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-28 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The 80mm fan is the only moving part; dust buildup over time can reduce airflow, so periodic cleaning with compressed air is recommended to maintain cooling performance.
The 420W total output ceiling is the primary limit; sustained draws above this rating will trigger protection shutdown or voltage droop on the rails.
The 80mm fan moves enough air for 420W loads; expect moderate audible airflow and warm exhaust, typical for a single-fan ATX supply under continuous use.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?