EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Replace Power
420W ATX power supply with switchable 110V/220V input, 80mm cooling fan, and SATA, 20+4 pin ATX, 12V ATX, peripheral and floppy connectors
The Replace Power RPSU-C99-57 is a 420W ATX unit built to replace the original supply in eMachines T3120 T3095 T2984 T2894 T2862 T2778 systems. It accepts 110V or 220V input via a manual switch and uses an 80mm fan for cooling. The grey chassis fits standard ATX mounting points.
The box includes one 15-inch SATA connector one 14-inch ATX connector that supports both 20-pin and 24-pin motherboards one 14-inch 12V ATX connector two 15-inch large peripheral connectors two 6-inch large peripheral connectors and one 6-inch small peripheral connector. These lengths suit the original eMachines chassis layouts.
Installation follows the normal ATX procedure: remove the old unit fasten the four mounting screws and plug each keyed connector into its matching socket. The 20+4 pin main cable and the dedicated 12V cable must both seat fully or the system will not start. The fixed cables cannot be shortened so excess length must be routed behind the motherboard tray.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-57 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The unit uses a single 80 mm fan for cooling; dust buildup can reduce airflow, so periodic cleaning with compressed air is recommended to maintain thermal performance.
The 12 V ATX connector supplies up to 12 A; exceeding this current will trigger the protection circuit and shut the supply down.
At full 420 W load the 80 mm fan spins faster, increasing audible noise and exhausting warm air from the rear of the chassis.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
No language matches that.
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?