BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
RIMLANCE
A 16 GB dual-channel DDR3 kit running at 1333 MHz with CL9 latency and 1.35 V low-voltage operation
This 16 GB kit contains two 8 GB unbuffered DIMMs built for desktop systems that use DDR3 memory. The modules run at 1333 MT/s with a CAS latency of 9 and operate at 1.35 V. They are designed for general multitasking and everyday workloads.
Replacing a smaller DDR3 kit with this 16 GB dual-channel set adds headroom for heavier multitasking and memory-intensive applications. The jump is worthwhile when your current installation leaves little free memory during typical use.
Verify that your motherboard accepts 240-pin DDR3 UDIMMs and supports 1.35 V low-voltage operation. Confirm the board can run memory at 1333 MT/s and that two slots are free for the dual-channel pair.
| Brand | RIMLANCE |
|---|---|
| Model | RUD10600LD8C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
Yes, each 8 GB stick uses the standard 240-pin DDR3 form factor that matches any desktop board with DDR3 slots.
Insert both modules into the same-coloured DIMM slots — usually slots one and three — pressing firmly until the retention clips click on both ends.
No, the low 1.35 V operation reduces heat and stress, so the kit should last the life of a typical DDR3 system without degradation.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?