Seagate BarraCuda Q5 ZP500CV3A001 500GB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
Seagate
An M.2 2280 internal SSD delivering up to 2400 MB/s read and 1700 MB/s write over PCIe Gen3 x4 with 274 TBW endurance
The Seagate BarraCuda Q5 is a 1TB internal SSD built on an M.2 2280 form factor with a PCIe Gen3 x4 NVMe 1.3 interface. It uses 3D QLC NAND to deliver sequential read speeds up to 2400 MBps and write speeds up to 1700 MBps. This drive targets everyday computing, gaming and content workloads that need faster boot and load times than a traditional hard drive.
Verify that your motherboard or laptop has an M.2 2280 slot wired for PCIe Gen3 x4 NVMe 1.3 operation. Some M.2 slots support only SATA signalling and will not work with this NVMe drive. Confirm the physical slot length accepts the 2280 form factor and that your system BIOS recognises NVMe boot devices.
The single-sided M.2 2280 design installs directly into the board without cables, freeing drive bays and SATA ports for other storage. Active power draw is 3.1W with an idle draw of 27 mW, keeping thermal load low in compact mini PCs and ultra-thin laptops. A 274 TBW endurance rating and 1,800,000 hour MTBF support long-term operation across consumer workloads.
| Brand | Seagate |
|---|---|
| Series | BarraCuda Q5 |
| Model | ZP1000CV3A001 |
| Part Number | ZP1000CV3A001 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D QLC |
| Interface | PCIe Gen3 x4 NVMe 1.3 |
| Protocol | NVMe 1.3 |
| Cache | 0MB |
| Max Sequential Read | Up to 2400 MBps |
| Max Sequential Write | Up to 1700 MBps |
| Terabytes Written (TBW) | 274TB |
| MTBF | 1,800,000 hours |
| Features | Upgrade to cost-effective SSD speeds with next-gen 3D QLC NAND Leverage NVMe SSD speeds that are up to 50x faster than traditional hard drives Harness high sequential read/write speeds (up to 2400/1700 MB/s) for more responsive downloads, installs, and multitasking Get easy installation and upgrades with a slim M.2 2280 NVMe form factor Extend battery life with low active power requirements of up to 3.1W Rely on 1.8M-hours MTBF Enjoy added peace of mind with 1-year Rescue Data Recovery Services Benefit from long-term durability with 274TB total bytes written (TBW) Migrate and clone d |
| Power Consumption (Idle) | 27 mW |
| Power Consumption (Active) | 3.1W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| 出貨重量 | 0.05 kg |
| 包裝尺寸 | 178 × 133 × 13 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The drive ships as a bare M.2 2280 module; no heatsink, screw or cable is included, so check whether your motherboard or laptop supplies the retention screw before fitting.
The supplied specifications cover the 1TB version only; if you need more space you would have to choose a different model or series.
It is the peak throughput the controller can reach over a PCIe Gen3 x4 link under ideal conditions; real-world speeds will be lower and depend on your system, workload and thermal limits.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?