Seagate BarraCuda Q5 ZP1000CV3A001 1TB M.2 2280 PCIe Gen3 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
Seagate
A 2 TB M.2 2280 NVMe drive delivering sequential reads up to 2400 MB/s and writes up to 1800 MB/s using 3D QLC NAND
The Seagate BarraCuda Q5 ZP2000CV3A001 is a 2TB internal SSD built on 3D QLC NAND. It uses an M.2 2280 form factor with a PCIe Gen3 x4 NVMe 1.3 interface. The drive targets consumers who want a cost-effective upgrade from mechanical storage to solid-state speeds. Sequential reads reach up to 2400 MBps and writes up to 1800 MBps.
The SSD draws 25 mW at idle and up to 3.3W during active workloads. It operates between 0°C and 70°C and survives storage temperatures from -40°C to 85°C. With no moving parts the drive produces no audible noise. Shock resistance is rated at 1500G and the MTBF is 1,800,000 hours. Total bytes written endurance is 531TB.
The M.2 2280 module plugs directly into a compatible motherboard slot, removing the need for drive bays and cables. Its slim profile frees space inside small-form-factor chassis and laptops. Low active power consumption helps extend battery life in mobile systems. Seagate DiscWizard software is available for migration and cloning from an old drive.
| Brand | Seagate |
|---|---|
| Series | BarraCuda Q5 |
| Model | ZP2000CV3A001 |
| Part Number | ZP2000CV3A001 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D QLC |
| Interface | PCIe Gen3 x4 NVMe 1.3 |
| Cache | 0MB |
| Max Sequential Read | Up to 2400 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 1,800,000 hours |
| Features | Upgrade to cost-effective SSD speeds with next-gen 3D QLC NAND Leverage NVMe SSD speeds that are up to 50x faster than traditional hard drives Harness high sequential read/write speeds (up to 2400/1800 MB/s) for more responsive downloads, installs, and multitasking Get easy installation and upgrades with a slim M.2 2280 NVMe form factor Extend battery life with low active power requirements of up to 3.3W Rely on 1.8M-hours MTBF Enjoy added peace of mind with 1-year Rescue Data Recovery Services Benefit from long-term durability with 531TB total bytes written (TBW) Migrate and clone d |
| Power Consumption (Idle) | 25 mW |
| Power Consumption (Active) | 3.3W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 2.15mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
| 出貨重量 | 0.05 kg |
| 包裝尺寸 | 178 × 132 × 13 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Slide the drive into the M.2 2280 slot at an angle, press it flat and secure it with the motherboard screw; the step often missed is leaving the protective label on the controller, which can trap heat.
The drive has no user-serviceable parts; its 531 TBW endurance rating and 1,800,000-hour MTBF indicate when a full replacement is due rather than a component swap.
The 3D QLC NAND write speed drops after the SLC cache fills, so sequential write performance falls below the 1800 MBps peak during long transfers.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?