我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with mSATA slot and 22-pin SATA connector

SMUGDESK

SMUGDESK mSATA PCIe SSD to 2.5" SATA II 22-pin Converter Adapter

SKU CH-JREW-QK1DZ

Converts a PCIe mSATA SSD into a standard 2.5" SATA II 22-pin drive for desktop PC bays

  • Repurpose an mSATA SSD as 2.5" SATA storage
  • Standard 2.5" form factor fits common drive bays
  • SATA II 3Gbps bandwidth for daily file tasks
  • Driver-free plug-and-play with SATA-equipped motherboards
  • Cost-saving way to reuse old mSATA SSDs

SMUGDESK mSATA to 2.5" SATA Adapter

This adapter board converts a PCIe mSATA solid-state drive into a standard 2.5 inch SATA II storage device. It fits common 2.5 inch drive bays inside desktop PC chassis for internal secondary storage expansion. The product targets DIY builders who want to recycle an old mSATA SSD as a system disk or data backup drive. It is not suitable for users with M.2 NVMe, M.2 SATA or other non-mSATA form factor drives.

Driver-free installation and compatibility notes

Mount the mSATA SSD onto the adapter board using the onboard connector, then secure the assembly into a 2.5 inch bay and attach standard SATA data and power cables. No drivers or extra software are required for Windows, Linux or other mainstream operating systems. The most common error is attempting to use an M.2 NVMe, M.2 SATA or non-PCIe mSATA module, which the adapter physically and electrically rejects. Verify the drive is a genuine PCIe mSATA SSD before purchase.

SATA II 3Gbps bandwidth limit

The adapter operates at the SATA II specification, capping maximum transfer speed at 3Gbps regardless of the native capability of the installed mSATA SSD. This ceiling affects large sequential file moves and benchmark results more than typical daily file storage or system boot tasks. Builders needing higher throughput for intensive workloads should note this interface constraint. The product does not support NVMe protocol or any interface beyond SATA II.

商品特色

  • Repurpose an mSATA SSD as 2.5" SATA storage
  • Standard 2.5" form factor fits common drive bays
  • SATA II 3Gbps bandwidth for daily file tasks
  • Driver-free plug-and-play with SATA-equipped motherboards
  • Cost-saving way to reuse old mSATA SSDs

商品規格

本商品目前尚未公佈規格。

商品問答

How can I confirm the mSATA SSD is recognised after installing the adapter?

Check BIOS or operating system disk management to see the drive listed as a SATA device; successful detection means the 22-pin connection is working.

What comes with the adapter and what must I supply myself?

The board includes the SATA 22pin interface; you must provide the mSATA SSD, a SATA data cable and a SATA power lead from your PSU.

Which mSATA SSD type is compatible with this adapter?

Only PCIE mSATA SSDs are supported; M.2 NVMe, M.2 SATA and other form factors will not fit or function.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。