我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black plastic 3.5 to 5.25 inch front bay adapter bracket with open bezel

STARTECH

STARTECH BRACKETFDBK 3.5in to 5.25in Front Bay Bracket Adapter

SKU CH-C4RG-ZW0RR

A plastic bracket that secures a 3.5in floppy drive into a 5.25in front bay with mounting screws and a black bezel

  • ColorBlack
  • Conversion Tray1 x 3.5" Drive to 5.25" Bay
  • SpecificationsDimension: 1.13" x 5.75" x 5.25" (H x L x W)
  • FeaturesThis plastic, floppy-drive adapter bracket lets you install

Model 1 x 3.5in (Front Bay)

Option 1 x 5.25in

  • Installs a 3.5 in drive into a 5.25 in front bay
  • Black plastic bezel blends with case aesthetics
  • Includes four mounting screws for secure fit
  • Compact 1.13 in height suits tight builds
  • RoHS and REACH certified for environmental compliance

3.5in to 5.25in Bay Adapter

This plastic bracket converts a single 5.25in front bay so it can accept a 3.5in floppy drive. The open-faced black bezel gives a clean look while securing the drive with the included mounting screws. It is aimed at builders restoring or maintaining legacy systems that still use 3.5in floppy media.

Build Integration

The adapter occupies one 5.25in bay and requires no additional power or data connections beyond the drive itself. It frees the builder from the fixed 3.5in floppy bay location dictated by the case layout, allowing the drive to sit higher or lower in the chassis as preferred. Four mounting screws are supplied for installation.

Thermals and Power

As a passive plastic bracket it draws no power and adds no active cooling noise. The open design allows the case airflow to reach the installed drive without restriction. Operating temperatures and acoustic levels remain entirely dependent on the drive and the case ventilation.

商品特色

  • Installs a 3.5 in drive into a 5.25 in front bay
  • Black plastic bezel blends with case aesthetics
  • Includes four mounting screws for secure fit
  • Compact 1.13 in height suits tight builds
  • RoHS and REACH certified for environmental compliance

商品規格

BrandStarTech.com
ModelBRACKETFDBK
ColorBlack
Conversion Tray1 x 3.5" Drive to 5.25" Bay
SpecificationsDimension: 1.13" x 5.75" x 5.25" (H x L x W)
FeaturesThis plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay.
A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.
Mount almost any 3.5in device into a standard 5.25in front bay.
Install a 3.5in hard drive into a single 5.25in front bay
3.5 to 5.25 Adapter
Hard Drive Bracket
Drive Bay Adapter -5.25
出貨重量0.14 kg
包裝尺寸170 × 152 × 48 mm

其他版本

同系列還有 4 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1.1 in height leave enough clearance for the front-panel door to close?

The bracket measures 1.1 in high, 5.3 in wide and 5.7 in deep, matching a standard 5.25 in front bay so most case doors close normally.

Does the plastic bezel get hot or noisy when a drive runs continuously?

The adapter has no moving parts or electronics; it adds no heat or noise beyond what the installed drive produces.

Do I need to supply my own 3.5 in floppy drive and mounting screws?

Four mounting screws are included; you only need to provide the 3.5 in floppy drive you want to install.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。