我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black 80mm slim case fan 80x80x15mm hydraulic bearing 1.4m bare wires

SXDOOL

SXDOOL 80mm Slim Hydraulic Case Fan DJT80RBAS3-S04 2400RPM 12V 0.09A

SKU CH-BXJ7-YZBEJ

An 80 mm slim hydraulic case fan spinning at 2400 RPM on 12 V for quiet, targeted airflow

  • TypeCase Fan
  • Fan Size80mm
  • Bearing TypeHydraulic
  • RPM2000-2499 RPM
  • ColorBlack
  • LEDNon-LED
  • 80 mm slim profile fits tight 15 mm bays
  • Hydraulic bearings deliver quiet 2400 RPM airflow
  • 12 V 0.09 A draw keeps power use low
  • 72 mm mounting holes match standard 80 mm frames
  • 4 m twin leads allow flexible routing

80 mm slim hydraulic case fan

This 80 mm slim fan uses a hydraulic bearing and spins at 2400 rpm from a 12 V supply drawing 0.09 A. It targets builders who need a low-profile 15 mm thick cooler for tight chassis or replacement of an 8015-size unit. The black frame carries no LEDs.

Two-wire 1.4 m leads install without a connector

The fan ships with bare two-wire leads roughly 1.4 m long, so you must crimp or solder a suitable header for your board or controller. Mounting holes sit on a 72 mm square pitch, matching standard 80 mm patterns, but the missing plug adds a wiring step.

Moves air in slim 15 mm spaces at 2400 rpm

At full speed the fan delivers airflow suited to restricted 15 mm gaps such as compact servers or small-form-factor cases. Headroom ends when static pressure exceeds what a 12 V 0.09 A hydraulic bearing can sustain, limiting use in dense radiator stacks.

商品特色

  • 80 mm slim profile fits tight 15 mm bays
  • Hydraulic bearings deliver quiet 2400 RPM airflow
  • 12 V 0.09 A draw keeps power use low
  • 72 mm mounting holes match standard 80 mm frames
  • 4 m twin leads allow flexible routing

商品規格

TypeCase Fan
Fan Size80mm
Bearing TypeHydraulic
RPM2000-2499 RPM
ColorBlack
LEDNon-LED

商品問答

How can I verify the 80mm hydraulic fan is spinning at the rated 2400 RPM after installation?

Enter the BIOS or use a monitoring utility to read the fan header speed; it should report close to 2400 RPM when the fan is powered from the 12 V line.

What comes in the box and what must I supply myself for the DJT80RBAS3-S04?

The fan with two bare wires roughly 1.4 m long is included; you must provide a 3-pin or 4-pin connector or solder the leads directly to a 12 V source.

Which version of this 80 mm slim fan should I choose for a standard 72 mm mounting pattern?

The DJT80RBAS3-S04 matches the 72 × 72 mm hole spacing, runs on 12 V at 0.09 A and fits the 80 × 80 × 15 mm Nidec 8015 form factor.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。