我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Ten natural nylon filament spools on small reels

Taulman 3D

Taulman 3D Nylon 230 Filament 2.85mm 1lb Natural 10 pack

SKU CH-6W3H-ATMVS

Ten spools of 2.85 mm natural Nylon 230 filament print at 228–235 °C on unheated beds with 4980 PSI tensile strength and 417 % elongation

  • ColorNatural
  • TypeFilament
  • Prints at 228–235 °C without a heated bed
  • Standard Nylon 6 with no chemical additives added
  • High 417 % elongation for flexible, durable parts
  • 4980 PSI tensile strength suits functional prototypes
  • Ten 1 lb spools of 2.85 mm natural filament

Nylon 230 10-pack for cold beds

This pack contains ten spools of Taulman 3D Nylon 230 filament in natural colour. Each spool weighs 1 lb and uses a 5-inch diameter. The material is a standard Nylon 6 formulation developed for printers with cold print beds and lower temperature capabilities. No chemical additives are included in the filament.

Suited for low-temp Nylon 6 printing

Makers who need a nylon that prints between 228 °C and 235 °C on an ambient bed will find this filament appropriate. Typical applications include light-load gears, fan blades, housings, phone covers, protective enclosures and cosmetic containers. Builders whose printers require a heated bed above ambient temperature or who need a different filament diameter should look at other materials.

2.85 mm diameter decides fit

The filament size is 2.85 mm, which determines whether it matches the printer’s extruder and Bowden system. Printing temperature ranges from 228 °C to 235 °C with a bed temperature at ambient. Tensile strength is 4980 PSI and elongation at break is 417 %.

商品特色

  • Prints at 228–235 °C without a heated bed
  • Standard Nylon 6 with no chemical additives added
  • High 417 % elongation for flexible, durable parts
  • 4980 PSI tensile strength suits functional prototypes
  • Ten 1 lb spools of 2.85 mm natural filament

商品規格

Brandtaulman3d
ColorNatural
TypeFilament

商品問答

Will the 2.85mm Nylon 230 filament work on my printer that only has a cold bed and lower temperature capability?

Yes, Nylon 230 was developed specifically for systems with cold print beds and lower temp capabilities, printing at 228°C to 235°C with the bed at ambient temperature.

How can I verify the filament is printing correctly after loading the first spool?

A successful print will show strong layer adhesion at the 228°C to 235°C range, with parts achieving 4980 PSI tensile strength and 417% elongation when printed on an ambient bed.

What exactly comes in the 10-pack box and is there anything else I need to buy to start printing?

The box contains ten 1 lb spools of 2.85mm Natural Nylon 230 filament on 5-inch spools; no chemical additives are included, and the filament prints on an ambient bed so no heated bed upgrade is required.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。