我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green PCB adapter card with PCIe x1 edge connector and one white 32-bit PCI slot plus 4-pin power header

TeKit

TeKit NTRC100339W PCI-E1X to PCI expansion card

SKU CH-XZ36-330CX

Connects legacy PCI cards to a PCIe x1 slot with PCI 2.3 and PCIe 1.0 compliance

  • StandardPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter
  • SpecificationsPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter
  • FeaturesPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter
  • Connect legacy PCI cards to PCIe motherboards via PCIe 1.0 lane
  • Plug-and-play installation requires no driver configuration for immediate use
  • Supports 32-bit 33 MHz PCI bus with 2.5 Gbps per direction bandwidth
  • Provides 3.3 V, 5 V and 12 V power through 4-pin connector
  • Compatible with Windows 2000, XP, Vista, 7, 8 and Linux

Legacy PCI Adapter for Modern Systems

This TeKit NTRC100339W adapter lets you install a 32-bit 33 MHz PCI card into an open PCI Express x1 slot on a current motherboard. It targets IT professionals and enthusiasts who must keep older expansion hardware working on newer platforms.

Plug-and-Play Build with Auxiliary Power

The card follows the PCI Express 1.0 and PCI 2.3 specifications and presents a single low-profile PCI slot. A 4-pin power connector must be attached to supply 3.3 V, 5 V and 12 V rails to the installed device for stable operation.

Bandwidth and Voltage Constraints

The x1 link provides 2.5 Gbps per direction under the 1.0 standard, limiting throughput for high-speed legacy cards. The slot delivers up to 1 A at 3.3 V, 100 mA at 3.3 V auxiliary, 5 A at 5 V and 500 mA at 12 V, so power-hungry peripherals may exceed the budget.

商品特色

  • Connect legacy PCI cards to PCIe motherboards via PCIe 1.0 lane
  • Plug-and-play installation requires no driver configuration for immediate use
  • Supports 32-bit 33 MHz PCI bus with 2.5 Gbps per direction bandwidth
  • Provides 3.3 V, 5 V and 12 V power through 4-pin connector
  • Compatible with Windows 2000, XP, Vista, 7, 8 and Linux

商品規格

BrandTeKit
ModelNTRC100339W
StandardPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter
SpecificationsPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter
FeaturesPCI-E1X TO PCI expansion card PCI-Express-to-PCI adapter

商品問答

What bandwidth does the PCI Express 1.0 x1 link on this adapter actually provide?

The card uses a PCI Express 1.0 single-lane connection running at 2.5 Gbps per direction, which is the practical throughput ceiling for any PCI device plugged into it.

What slot size and power connector does the TeKit NTRC100339W need on the motherboard and from the PSU?

It installs in a standard PCI Express x1 slot and requires a 4-pin Molex power lead supplying both 12 V and 5 V to run the onboard PCI slot.

Which step do builders most often miss when fitting this PCI-E-to-PCI adapter?

Forgetting to plug the 4-pin Molex power cable into the card; without it the PCI slot receives no 3.3 V, 5 V or 12 V supply and the legacy card will not work.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。