我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Timetec

Timetec Hynix IC 8GB Kit (2x4GB) DDR3 1066MHz CL7 Laptop RAM

SKU CH-XJG2-DKAEF

Dual-channel 8 GB DDR3 kit (2 × 4 GB) running at 1066 MHz CL7 1.5 V for laptop upgrades

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Dual-channel 8GB kit expands multitasking headroom
  • DDR3 1066MHz CL7 timing accelerates data access
  • 5V JEDEC voltage ensures broad laptop compatibility
  • 204-pin SO-DIMM form factor fits standard notebook slots
  • Hynix ICs selected for stability under load

8 GB DDR3 kit for laptop upgrades

This Timetec kit supplies 8 GB of DDR3 memory as two 4 GB modules built with Hynix ICs. It targets owners of compatible notebooks who want to add capacity or replace existing sticks with a matched pair.

Replaces slower or smaller DDR3 SO-DIMMs

The jump is worthwhile when your system currently runs on less than 8 GB or uses modules rated below 1066 MHz and CL7. Swapping to this matched kit can raise the memory ceiling and tighten latency in one step.

Check DDR3 SO-DIMM slot count and voltage

Verify that your notebook accepts 204-pin unbuffered non-ECC DDR3 at 1.5 V and has two free slots or can replace the existing pair. The modules measure 30 mm by 67.6 mm, so confirm physical clearance before ordering.

商品特色

  • Dual-channel 8GB kit expands multitasking headroom
  • DDR3 1066MHz CL7 timing accelerates data access
  • 5V JEDEC voltage ensures broad laptop compatibility
  • 204-pin SO-DIMM form factor fits standard notebook slots
  • Hynix ICs selected for stability under load

商品規格

BrandTimetec
ModelMM-G4GD310S7C
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 204-pin SO-DIMM fit my laptop's memory slot?

The kit uses standard 204-pin DDR3 SO-DIMM modules measuring 30 mm by 67.6 mm, which match the JEDEC form factor for laptop memory slots.

What is the correct way to seat the modules during installation?

Insert each module at an angle into the 204-pin slot, then press down evenly until the side retention clips click into place on both sides.

Do these dual-rank 2Rx8 modules require any firmware updates or periodic maintenance?

No firmware updates are needed; the modules are non-ECC unbuffered DDR3 running at 1.50 V and operate maintenance-free for the life of the laptop.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。