BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
TOPOWER
ATX 3.0 power supply delivers 1000 W with 80 PLUS Gold efficiency, PCIe 5.0 12VHPWR cable and full modular cabling
The TOPOWER TOP-1000WG1 delivers 1000 W through a single +12 V rail and meets ATX 3.0 and PCIe 5.0 requirements. It includes a native 12VHPWR cable for 4080 and 4090 class graphics cards. Full modular cabling keeps the build clean and airflow unobstructed.
Verify that your motherboard and GPU accept the 12VHPWR connector and that the case can accommodate a 160 mm deep unit. The 24 pin main connector and six 6+2 pin PCIe plugs cover most modern layouts, but confirm cable reach for your specific component placement before ordering.
A 140 mm fan runs at lower RPM under typical loads, and a silent switch lets you prioritise quiet operation. 80 PLUS Gold certification means high efficiency across the 100 to 240 V input range, reducing waste heat and lowering overall power draw during normal use.
| Brand | TOPOWER |
|---|---|
| Series | 80 Plus |
| Color | Black |
| Type | ATX 3.0 Compatible |
| Maximum Power | 1000 W |
| Fans | 1 x 140 mm |
| PFC | Active |
| Main Connector | 24 Pin |
| +12V Rails | Single |
| PCI-Express Connector | 6 x 6+2 Pin |
| SATA Power Connector | 12 |
| SLI | Ready |
| Haswell Support | Ready |
| CrossFire | Ready |
| Max PSU Length | 160 mm |
| Modular | Yes |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Power Rating | 1000W |
| Frequency Range | 50/60 Hz |
| +3.3V Max. Current | 25A |
| +5V Max. Current | 25A |
| -12V Max. Current | 0.5A |
| +5VSB Max. Current | 2A |
| 12V Power Connector | 1 x 4+4 Pin ATX/EPS 12V |
| Floppy Connector | 1 |
| Peripheral Connector | 4 |
| Fans Total Quantity | 1 |
| Top Fans Size | 140mm |
The fully modular unit ships with a 24‑pin ATX cable, a 12VHPWR connector for PCIe 5.0 graphics cards, six 6+2‑pin PCIe cables and twelve SATA power leads; no extra cables are required for a standard build.
This specific SKU is a single 1000 W ATX 3.0 unit; there are no alternate wattages or versions listed, so the only choice is whether 1000 W matches your system’s peak draw.
It guarantees up to 1000 W of continuous DC output on a single +12 V rail, with 80 PLUS Gold efficiency and a 140 mm fan that can run quietly under load.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?