Tripp Lite
Tripp Lite SMART1500RMXLN 1440VA 1440W 120V UPS 8 Outlets Network Card 2U
1.44 kVA line-interactive UPS with eight NEMA 5-15R outlets, AVR, LCD, pre-installed network card and 2U rack/tower form factor
- International Version120V
- Input Voltage Range80V-151V; adjustable to 70-153V
- Input ConnectionNEMA 5-15P
- VA Rating1440VA
- Watts1440W
- Output Voltage120V
VA 1500 VA w/ WEBCARDLX
- 750 VA
- 1000 VA
- 1500 VA w/ WEBCARDLX
- 2200 VA
- 2200 VA w/ WEBCARDLX
- 3000 VA
- 3000 VA w/ WEBCARDLX
被劃上刪除線的選項確實存在,但本站並無供貨。
- 44 kVA capacity supports critical IT loads
- Sine-wave output protects sensitive connected equipment
- Pre-installed network card enables 24/7 remote management
- Automatic voltage regulation corrects 80 V to 151 V input range
- 1 minutes runtime at full 1440 W load
1440VA Line-Interactive UPS for Rack Deployments
The Tripp Lite SmartPro SMART1500RMXLN delivers 1440VA and 1440W of sine-wave battery backup in a 2U rackmount chassis. It provides eight NEMA 5-15R outlets and includes a pre-installed network management card for remote monitoring. Automatic voltage regulation corrects input fluctuations between 80V and 151V without using battery power.
Upgrade from Standby Units When Runtime Matters
This model replaces basic standby UPS units that cannot correct voltage without draining the battery. The jump is worth it when connected equipment requires pure sine-wave output or when extended runtime at half load is needed. At 720W load the internal VRLA batteries provide 15.1 minutes of backup, while full 1440W load yields 5.1 minutes.
Standard 2U Rack Install with Network Card Ready
The unit mounts in a standard 2U rack space measuring 3.45 inches high, 17.20 inches wide and 17.60 inches deep. Communication ports include USB, DB9 serial, contact closure and an emergency power off connector alongside the factory-fitted network card. Recharge from 10% to 90% takes less than 4.5 hours after a full-load discharge.
商品特色
- 44 kVA capacity supports critical IT loads
- Sine-wave output protects sensitive connected equipment
- Pre-installed network card enables 24/7 remote management
- Automatic voltage regulation corrects 80 V to 151 V input range
- 1 minutes runtime at full 1440 W load
商品規格
| Brand | TRIPP LITE |
|---|---|
| Series | SmartPro |
| Model | SMART1500RMXLN |
| International Version | 120V |
| Input Voltage Range | 80V-151V; adjustable to 70-153V |
| Input Connection | NEMA 5-15P |
| VA Rating | 1440VA |
| Watts | 1440W |
| Output Voltage | 120V |
| Output Frequency | 50 / 60 Hz |
| Outlets | 8 x NEMA 5-15R |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Battery Run Time | Full Load (min.): 5.1 min. (1440w) Half Load (min.): 15.1 min. (720w) |
| Battery Recharge Time | Less than 4.5 hours from 10% to 90% (typical, full load discharge) |
| Interface Port | Contact closure; DB9 Serial; EPO (emergency power off); Micro-USB; Pre-installed network card; USB (HID enabled); USB-A |
| Rackmountable | Yes |
| Surge Energy Rating | 380 Joules |
| Temperature | Operating Temperature Range: 32° to 104°F (0° to 40°C) Storage Temperature Range: 5° to 122°F (-15° to +50°C) |
| Humidity | 0-95% non-condensing |
| Dimensions | 3.45" x 17.20" x 17.60" |
| Weight | 50.71 lbs. |
| Package Contents | 1440VA 1440W 120V Line-Interactive UPS WEBCARDLXE network management card USB cable DB9 cable Rack-mounting hardware Tower support stands Safety instructions Quick Start Guide |
| 出貨重量 | 24.95 kg |
| 包裝尺寸 | 584 × 508 × 229 mm |
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Tripp Lite SMART2200RMXL2U 1950VA 1950W 120V Line-Interactive Sine Wave UPS
- 120V
- NEMA 5-20P
Tripp Lite SMART2200RMXLN 1950VA 1950W 120V UPS 7 Outlets 2U Rack/Tower
- 120V
- NEMA 5-20P
Tripp Lite SMART3000RMXLN 3000 VA 2880 W UPS
- 120 V AC Nominal
- 3000 VA
Tripp Lite SMART3000RMXL2U 3000VA 3000W 120V UPS 7 Outlets 2U Rack/Tower
- 120V
- 80V-151V; adjustabl…
商品問答
What rack depth is required for the 17.60-inch deep 2U chassis?
The unit measures 17.60 inches deep, so a rack or shelf with at least that usable depth plus cable clearance is needed.
How do you connect the pre-installed network card for remote monitoring?
Plug an Ethernet cable into the card's RJ45 port, then configure the IP address through the front-panel LCD or the USB HID interface.
When should the VRLA battery pack be replaced?
Expect replacement after 3 to 5 years; the LCD will show a battery fault and run time will drop well below the 5.1-minute full-load rating.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case








