Ubiquiti Networks USW-Pro-Max-16 16-port Layer 3 network switch
- Rackmount
- Managed
Ubiquiti Networks
A 48-port managed Layer 3 rackmount switch with 32 GbE and 16 2.5 GbE RJ45 ports plus four 10G SFP+ uplinks, 224 Gbps switching capacity and Etherlighting port identification
Model Pro Max 48
The USW-Pro-Max-48 is a rackmount managed switch built for networks that need Layer 3 routing between local VLANs. It provides 48 RJ45 downlinks and four 10G SFP+ uplinks in a single 1U appliance. Administrators configure it through UniFi Network 8.0.24 or later.
Each RJ45 port uses Etherlighting illumination to show link speed, status and native VLAN at a glance, especially when paired with Etherlighting patch cables. A USP-RPS DC input sits alongside the universal AC supply so the switch can stay online during a power-source failure. No PoE circuitry is present, keeping the maximum draw to 100 W.
Sixteen ports negotiate at 2.5 GbE while thirty-two operate at 1 GbE, giving mixed-speed clients headroom without oversubscribing the 112 Gbps fabric. The four 10G SFP+ uplinks handle aggregation to core switches or servers. Networks that require PoE for phones, cameras or access points will need a different model.
| Brand | Ubiquiti |
|---|---|
| Series | Network Switch |
| Model | Pro Max 48 |
| Part Number | USW-Pro-Max-48 |
| Format | Rackmount |
| Network Management Type | Managed |
| Primary Ports | 48 x RJ45 + 4 x SFP+ |
| Primary Port Speed | Total non-blocking throughput 112 Gbps Switching capacity 224 Gbps Forwarding rate 166.656 Mpps |
| Primary Port Type | (32) GbE RJ45 ports (16) 1/2.5 GbE RJ45 ports (4) 10G SFP+ ports |
| Management Interface | Ethernet In-Band |
| PoE | No |
| Layer | 3 |
| Layer 2 Features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 Features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| Port Mirroring | Yes |
| LEDs | System Status RPS Status |
| Button | Factory reset |
| Power | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input |
| Max Power Consumption | 100 W |
| Dimensions | 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") |
| Weight | Without mounting brackets: 4.8 kg (10.6 lb) With mounting brackets: 4.9 kg (10.8 lb) |
| Certification | CE, FCC, IC |
| System Requirement | UniFi Networks Version 8.0.24 and later |
| Temperature | -5 to 40° C (23 to 104° F) |
| Humidity | 10 to 90% noncondensing |
| 出貨重量 | 5.92 kg |
| 包裝尺寸 | 521 × 432 × 122 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The switch has a maximum power consumption of 100 W under full load.
Total non-blocking throughput is 112 Gbps while switching capacity is 224 Gbps, so the 112 Gbps aggregate limit appears first.
At the 100 W maximum power rating, the unit converts that electrical draw directly into heat, requiring the rack airflow to handle 100 W of thermal load.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?