我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Red M.2 NVMe to PCIe 3.0 x16 adapter card with two aluminium heatsinks and thermal pads

Wadermoon

Wadermoon M.2 NVMe to PCIe 3.0 x16 Adapter Red 2230-2280 25°C Drop

SKU CH-9BYH-4TR63

Converts an M.2 NVMe SSD to a PCIe 3.0 x16 slot with dual heatsinks and 68 copper ventilation holes, lowering drive temperature by 25 degrees Celsius

  • ColorRed
  • Changer TypeN/A
  • SpecificationsPCB 68copper hole effective ventilation heat dissipation,Inc
  • Connector AOnly Supports M.2 SSD PCIE interface
  • FeaturesAluminum Sheet Thermal Conductivity Silicon Wafer Cooling, S
  • Converts M.2 NVMe to PCIe 3.0 x16 for full-speed operation
  • Advanced heatsink with 68 copper ventilation holes drops temperature 25 degrees Celsius
  • Supports M.2 NVMe SSD sizes 2230, 2242, 2260, 2280mm
  • LED power and data transfer status with no driver installation required
  • Maximum transfer speed reaches 3259Mb/s for NVMe drives only

M.2 NVMe to PCIe 3.0 x16 Adapter

This adapter converts a single M.2 M-key NVMe SSD into a PCI Express 3.0 x16 card. It accepts drive lengths of 2230, 2242, 2260 and 2280 mm. An aluminium heatsink and three thermal pads are included to lower operating temperature by 25 degrees Celsius. No driver installation is required for Windows, Mac or Linux systems.

PCIe 3.0 x16 Interface Limits

The card only functions in a full-size PCIe x16 slot and will not work in x1, x4 or x8 slots. Throughput follows the PCIe 3.0 specification with a maximum transfer rate of 3259 Mb/s. The adapter does not support M.2 SATA (NGFF) drives, so a SATA-based M.2 SSD will not be recognised. LED indicators show power and data activity.

Installation Notes

Mount the SSD on the PCB, apply a thermal pad after removing its protective film, then attach the heatsink. Secure the assembly in an x16 slot; no low-profile bracket is needed. The board uses 68 copper ventilation holes for airflow. Builders needing a second M.2 drive or a SATA M.2 device must choose a different solution.

商品特色

  • Converts M.2 NVMe to PCIe 3.0 x16 for full-speed operation
  • Advanced heatsink with 68 copper ventilation holes drops temperature 25 degrees Celsius
  • Supports M.2 NVMe SSD sizes 2230, 2242, 2260, 2280mm
  • LED power and data transfer status with no driver installation required
  • Maximum transfer speed reaches 3259Mb/s for NVMe drives only

商品規格

BrandJEYI
SeriesJEYI Cool Swift 3.0 x 16
ColorRed
Changer TypeN/A
SpecificationsPCB 68copper hole effective ventilation heat dissipation,Including 2 heat sinks.
Connector AOnly Supports M.2 SSD PCIE interface
FeaturesAluminum Sheet Thermal Conductivity Silicon Wafer Cooling, Strong heat dissipation, the temperature drops 25 degrees Celsius. Converts one M.2 (M Key) interface to PCIE 3.0 x16 interface . With advanced heat sink solution,PCB 68 copper hole effective ventilation heat dissipation,Including 2 heat sinks. Supports M.2 Nvme PCIE SSD size 2230, 2242, 2260, 2280mm. LED power and data transfer status. No driver installation required. The design adopts GEN3 mode, which guarantees full-speed transportation in principle.
Modelm.2

商品問答

Which M.2 NVMe SSD lengths does this adapter accept?

The adapter supports M.2 NVMe SSDs in 2230, 2242, 2260 and 2280 mm sizes.

What does the 3259 Mb/s headline figure mean once the drive is in a real machine?

It represents the maximum theoretical NVMe transfer speed over the PCIe 3.0 x16 link; actual throughput depends on the specific SSD and system workload.

What interface standard is used and what does it cap in practice?

The card uses a PCIe 3.0 x16 slot, providing up to 16 lanes of Gen 3 bandwidth for the installed NVMe SSD.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。