Western Digital WD100EFGX 10TB 7200 RPM 512MB CMR SATA 3.5" internal hard drive
- SATA 6.0Gb/s
- 10TB
Western Digital
12 TB 7200 RPM CMR drive with 512 MB cache built for 24-bay NAS workloads
The Western Digital WD122KFBX Red Pro is a 12TB 3.5-inch internal hard drive built for 24/7 multi-user NAS environments. It uses CMR recording technology at 7200 RPM with a 512MB cache and a SATA 6.0Gb/s interface. The drive supports workloads up to 300TB per year and is validated for systems with up to 24 bays.
This drive replaces lower-capacity or desktop-class drives when storage demands exceed what consumer models can sustain. The jump is worth it when your array requires the 300TB annual workload rating, NASware 3.0 optimisation, and vibration protection for multi-bay enclosures. It is not suited for single-drive desktop use or workloads below the rated threshold.
Under continuous operation the drive maintains performance through 3D Active Balance Plus technology and error recovery controls tuned by NASware 3.0. Extended factory testing verifies reliability for round-the-clock RAID workloads. The 512MB cache helps absorb write bursts while the 7200 RPM spindle delivers consistent throughput for multi-user access.
| Brand | WD |
|---|---|
| Series | Red Pro |
| Model | WD122KFBX |
| Interface | SATA 6.0Gb/s |
| Capacity | 12TB |
| NAND Flash Memory Type | Hard Drive |
| Recording Technology | CMR |
| RPM | 7200 RPM |
| Cache | 512MB |
| Features | Optimized for NAS with NASware™ Western Digital’s exclusive NASware™ technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability. Designed for Continuous Operation WD Red Pro hard drives are designed to handle the rigorous demands of high-intensity 24x7 multi-user NAS environments and increase system durability. Tested for Dependable Compatibility Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures. Protected against Excessive Vibration WD Red |
| Usage | Enterprise NAS Hard Drives |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| 出貨重量 | 0.84 kg |
| 包裝尺寸 | 191 × 127 × 64 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The drive measures 26.10 mm tall, 101.60 mm wide and 147.00 mm long, matching the standard 3.5-inch form factor used in most desktop and NAS chassis.
Connect a standard SATA data cable to the 6.0 Gb/s port and a 15-pin SATA power plug; the common mistake is seating the data connector loosely, which drops the link to 3.0 Gb/s.
With a 300 TB annual workload rating and 512 MB cache, monitor SMART reallocated-sector counts; replace the unit once the workload counter approaches the rated limit or errors rise.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?