EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V operation for compatible microserver upgrades
This 32GB DDR4 2933MHz ECC SODIMM module is built for microserver, server and workstation laptops that require error-correcting memory. It runs at PC4-23400 speed with CL21 latency and standard 1.20V voltage. The unbuffered 260-pin design fits compatible SO-DIMM slots in compact enterprise systems.
The module serves as a direct compatible replacement for the Hynix HMAA4GS7AJR8N-WM part. The upgrade is worth it when your current system shows memory pressure under multi-threaded workloads or virtualisation tasks. Adding ECC protection helps prevent data corruption in always-on environments where uptime matters.
One 32GB stick provides substantial headroom for running multiple virtual machines, large databases or heavy container workloads without swapping. The single-module layout leaves additional SO-DIMM slots free for future expansion if the platform supports more than 32GB total. Systems limited to lower maximum memory per slot or non-ECC architectures cannot use this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GS7AJR8N-WM |
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA4GS7AJR8N-WM |
| Recommend Use | Compatible Replacement for Hynix HMAA4GS7AJR8N-WM |
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any slot built for DDR4 SO-DIMMs, but you must confirm your system accepts 32 GB unbuffered ECC modules before buying.
Align the notch on the module with the key in the slot, press straight down with even pressure until the side retention clips snap into the notches on the PCB.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it runs maintenance-free for the life of the system.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟