EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
DELL
Adds 8 GB of DDR4 2666 MHz ECC memory with a CL1.5 latency 288-pin DIMM for Dell server upgrades
This 8 GB DDR4 module is built for Dell servers that require error-correcting code memory. It operates at 2666 MHz with a CAS latency of 1.5 and uses the standard 288-pin DIMM form factor. The part is supplied new and carries Dell's own qualification.
Dell validates each module through a sustaining qualification process and accepts only first-pass yield components. The black PCB has no LED lighting, keeping the focus on reliability in dense server chassis. Using Dell-certified memory preserves the original system warranty and ensures full technical support coverage.
The PC4-21300 interface caps bandwidth at the rated 2666 MT/s, so workloads needing higher throughput will hit a ceiling with this module. An 8 GB stick also limits total density per channel compared to larger-capacity DIMMs. Systems requiring faster DDR4 speeds or greater per-slot capacity must look beyond this specification.
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL1.5 |
| ECC | ECC |
| Color | Black |
| LED Color | None |
| وزن الشحنة | 0.45 kg |
| أبعاد الطرد | 165 × 50 × 2 mm |
Yes, the PC4 21300 designation means the module is rated for a maximum data rate of 21300 MB/s when installed in a supported Dell system.
The 288-pin form factor matches standard DDR4 DIMM slots in compatible Dell PowerEdge servers; verify your specific model in the Dell Memory Selector.
Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then enable ECC in the BIOS if it is not set by default.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟