暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

DELL

DELL SNPD715XC8G 8GB DDR4 2666MHz ECC server RAM

SKU CH-SN3B-HZQ89 MPN SNPD715XC8G

Adds 8 GB of DDR4 2666 MHz ECC memory with a CL1.5 latency 288-pin DIMM for Dell server upgrades

  • Capacity8GB
  • Type288-Pin PC RAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL1.5
  • ECCECC
  • ColorBlack
  • 8GB capacity supports memory-intensive workloads
  • ECC protection detects and corrects single-bit errors
  • DDR4 2666MHz speed delivers PC4-21300 bandwidth
  • 288-pin DIMM fits standard DDR4 server slots
  • CL1.5 latency optimises data access timing

Dell server memory for ECC workloads

This 8 GB DDR4 module is built for Dell servers that require error-correcting code memory. It operates at 2666 MHz with a CAS latency of 1.5 and uses the standard 288-pin DIMM form factor. The part is supplied new and carries Dell's own qualification.

OEM-grade build with Dell certification

Dell validates each module through a sustaining qualification process and accepts only first-pass yield components. The black PCB has no LED lighting, keeping the focus on reliability in dense server chassis. Using Dell-certified memory preserves the original system warranty and ensures full technical support coverage.

DDR4 2666 speed ceiling and single-module capacity

The PC4-21300 interface caps bandwidth at the rated 2666 MT/s, so workloads needing higher throughput will hit a ceiling with this module. An 8 GB stick also limits total density per channel compared to larger-capacity DIMMs. Systems requiring faster DDR4 speeds or greater per-slot capacity must look beyond this specification.

特長

  • 8GB capacity supports memory-intensive workloads
  • ECC protection detects and corrects single-bit errors
  • DDR4 2666MHz speed delivers PC4-21300 bandwidth
  • 288-pin DIMM fits standard DDR4 server slots
  • CL1.5 latency optimises data access timing

仕様

BrandDell
Capacity8GB
Type288-Pin PC RAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL1.5
ECCECC
ColorBlack
LED ColorNone
配送重量0.45 kg
梱包サイズ165 × 50 × 2 mm

この商品に関する質問

Does the DDR4 2666 (PC4 21300) rating cap the transfer rate at 21300 MB/s in a compatible Dell server?

Yes, the PC4 21300 designation means the module is rated for a maximum data rate of 21300 MB/s when installed in a supported Dell system.

Will the 288-pin DIMM fit my Dell PowerEdge server memory slots?

The 288-pin form factor matches standard DDR4 DIMM slots in compatible Dell PowerEdge servers; verify your specific model in the Dell Memory Selector.

How is this ECC module installed, and what step do people often miss?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then enable ECC in the BIOS if it is not set by default.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。