BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00275897BTC
En stock
NEMIX RAM
NEMIX RAM 16GB DDR4 2133 CL15 1.2V 288-Pin UDIMM NAS QNAP RAM-16GDR4-LD-2133
A 16GB DDR4 2133 CL15 UDIMM module at 1.2V for compatible QNAP NAS systems
- Capacity16GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- Boost system responsiveness with 16GB DDR4 capacity
- Stable operation at 2133MHz PC4-17000 speed
- Low 1.2V voltage reduces power draw
- CL15 latency supports smooth multitasking
- 288-pin UDIMM fits QNAP NAS and desktop boards
Capacity and compatibility
This 16GB DDR4 module targets NAS and desktop upgrades where non-ECC unbuffered memory is required. The single stick fits 288-pin UDIMM slots and matches QNAP part RAM-16GDR4-LD-2133 for direct replacement.
Speed and voltage limits
DDR4 2133 at CL15 sets the practical bandwidth ceiling at PC4-17000 while the 1.20V operating voltage keeps power draw within standard desktop limits. No heat spreader is present, so airflow across the PCB handles thermal load.
Build and daily handling
Major OEM chips from Samsung, Micron or Hynix are assembled without LEDs or a spreader, keeping the profile low for tight NAS bays. The bare green PCB means installers should hold edges only and avoid flexing the module during insertion.
Puntos fuertes
- Boost system responsiveness with 16GB DDR4 capacity
- Stable operation at 2133MHz PC4-17000 speed
- Low 1.2V voltage reduces power draw
- CL15 latency supports smooth multitasking
- 288-pin UDIMM fits QNAP NAS and desktop boards
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD17000-628K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Preguntas sobre este artículo
Will this module fit my QNAP NAS that specifies the RAM-16GDR4-LD-2133 part number?
Yes, the supplier lists this module as compatible with that exact QNAP part number.
My motherboard has four 288-pin DDR4 slots — can I add this 16 GB stick alongside my existing memory?
The module is a standard 288-pin DDR4 UDIMM, so it will physically install in any DDR4 slot; check your board manual for maximum capacity per slot and total system limit.
Does the CL15 timing at 2133 MT/s require any voltage change in the BIOS?
The module operates at the standard 1.20 V, so no voltage adjustment is needed; the system should apply the correct timing automatically.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00278464BTC
En stock
