BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
NEMIX RAM
A 16GB DDR4 2133 CL15 UDIMM module at 1.2V for compatible QNAP NAS systems
This 16GB DDR4 module targets NAS and desktop upgrades where non-ECC unbuffered memory is required. The single stick fits 288-pin UDIMM slots and matches QNAP part RAM-16GDR4-LD-2133 for direct replacement.
DDR4 2133 at CL15 sets the practical bandwidth ceiling at PC4-17000 while the 1.20V operating voltage keeps power draw within standard desktop limits. No heat spreader is present, so airflow across the PCB handles thermal load.
Major OEM chips from Samsung, Micron or Hynix are assembled without LEDs or a spreader, keeping the profile low for tight NAS bays. The bare green PCB means installers should hold edges only and avoid flexing the module during insertion.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD17000-628K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Yes, the supplier lists this module as compatible with that exact QNAP part number.
The module is a standard 288-pin DDR4 UDIMM, so it will physically install in any DDR4 slot; check your board manual for maximum capacity per slot and total system limit.
The module operates at the standard 1.20 V, so no voltage adjustment is needed; the system should apply the correct timing automatically.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?