暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Chrome 45-degree revolvable compression fitting G1/4 10/16mm ID/OD

Alphacool

Alphacool G1/4 3/8"ID 5/8"OD 45° Revolvable Compression Fitting Chrome 17083

SKU CH-2HXC-JPHZC

A 45-degree revolvable compression fitting with G1/4 thread for 10 mm inner diameter tubing

  • TypeFittings

Color Chrome

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Precision 45° Revolvable Fitting

This Alphacool compression fitting joins 3/8" inner diameter tubing to a G1/4 thread at a fixed 45-degree angle. The revolvable body lets you orient the bend after tightening so tube routing stays clean. It suits custom-loop builders who need a compact directional change without adding extra fittings. The chrome finish resists peeling through a bonded chromatising process.

10 mm Inner Diameter for High Flow

The 10 mm bore (16/10 sizing) is the single spec that decides fit: it only accepts tubing with a 3/8" ID and 5/8" OD. Builders using 1/2" ID or 7/16" ID hose cannot use this fitting. No adapter is included, so verify your tubing dimensions before ordering.

Single Fitting Ships Ready to Install

The box contains one chrome fitting with its compression rings and G1/4 o-ring pre-seated. No tools, lubricant or extra seals are bundled. You simply push the tubing home and tighten the collar. Multi-pack buyers must order the quantity they need separately.

特長

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the 45° angle do for the tubing run inside the case?

The fixed 45° bend lets the tube leave the port at an angle, helping it clear nearby components without a sharp kink.

How does the G1/4 thread connect to the rest of the loop?

The G1/4 male thread screws into any standard G1/4 port on radiators, blocks, reservoirs or pumps.

What tubing sizes fit this compression fitting?

It accepts tubing with a 10 mm inner diameter and 16 mm outer diameter, matching 3/8" ID × 5/8" OD hose.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。