KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
KingSpec
A 2.5" SATA III solid-state drive with 1TB capacity, sequential reads up to 560 MB/s, writes up to 530 MB/s, and 480 TBW endurance
Options P3-1TB
The KingSpec P3-1TB is a 2.5 inch internal solid state drive with a 1TB capacity and a SATA III interface. It uses 3D NAND flash memory and delivers sequential read speeds up to 560 MBps and write speeds up to 530 MBps. Random performance reaches 65000 IOPS read and 70000 IOPS write.
Verify that your system has a free 2.5 inch drive bay and a SATA data cable connected to a SATA III port for full speed. Confirm the power supply provides a SATA power connector for the drive's 0.41W idle draw. Ensure the operating system supports TRIM and NCQ to maintain performance and endurance.
This drive suits users upgrading a laptop or desktop that relies on the SATA interface and needs 1TB of reliable storage with 480TB TBW endurance. It is not suited for builds requiring an M.2 form factor or PCIe based throughput.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-1TB |
| Part Number | P3-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be sourced separately.
The P3 series is offered in capacities up to 8TB, so the 1TB model is the entry point and larger drives can be chosen if more space is needed.
On a SATA III connection the drive can reach 560 MB/s read and 530 MB/s write, cutting boot and application load times to roughly one quarter of a traditional hard drive.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?