暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with USB-C port and castellated edges

LORDWORLD

LORDWORLD RP2040-Plus Development Board 133 MHz 4MB Flash USB-C

SKU CH-H15W-K9X37

RP2040 dual-core microcontroller board with 133 MHz clock, 264 KB SRAM, 4 MB Flash, USB-C, lithium-battery header and castellated edges for direct soldering

  • Dual-core Cortex M0+ processor scales to 133 MHz for responsive real-time tasks
  • 4 MB on-board Flash plus 264 KB SRAM stores firmware and buffers without external chips
  • USB-C connector simplifies power and data cables for modern workflows
  • Lithium battery header with TPS63000 buck-boost regulator delivers 1.8 A for portable projects
  • Castellated edges enable direct soldering to carrier boards for compact production designs

RP2040 microcontroller with 4MB Flash

The LORDWORLD RP2040-Plus is a development board built around the Raspberry Pi RP2040 microcontroller. It provides a dual-core Arm Cortex M0+ processor running up to 133 MHz with 264KB of SRAM and 4MB of on-board Flash memory. The board targets makers and engineers who need a compact, programmable platform for embedded projects. A USB-C connector simplifies power and data connections.

Upgrade from basic Pico-style boards

This board adds a lithium battery recharge and discharge header for portable operation. The onboard TPS63000 buck-boost regulator delivers up to 1.8A of current for efficient power management. USB 1.1 device and host support expands connectivity options beyond simple serial links. Low-power sleep and dormant modes extend battery life in remote sensing applications.

Castellated edges for direct soldering

Castellated module edges allow the board to be soldered directly onto a carrier PCB for volume production. The USB-C port replaces older micro-USB interfaces for a more durable mechanical connection. The DC-DC chip handles a wide input voltage range without external components. Builders who need wireless connectivity or larger storage must add separate modules.

特長

  • Dual-core Cortex M0+ processor scales to 133 MHz for responsive real-time tasks
  • 4 MB on-board Flash plus 264 KB SRAM stores firmware and buffers without external chips
  • USB-C connector simplifies power and data cables for modern workflows
  • Lithium battery header with TPS63000 buck-boost regulator delivers 1.8 A for portable projects
  • Castellated edges enable direct soldering to carrier boards for compact production designs

仕様

BrandLORDWORLD

この商品に関する質問

What board outline and hole pattern does the RP2040-Plus use so I can design a carrier PCB?

The board has castellated edges that match the Raspberry Pi Pico footprint, letting you solder it directly onto a carrier board without extra headers.

Which header do I solder first when adding the lithium-battery connector, and how do I avoid bridging the TPS63000 pins?

Solder the two-pin battery header before any side headers; use a fine tip and flux so the 1.8 A buck-boost chip pads stay clear of solder bridges.

How often should I check the 4 MB flash and the TPS63000 regulator for wear in a battery-powered logger?

The 4 MB flash is rated for many thousands of erase cycles, and the TPS63000 buck-boost regulator has no user-serviceable parts; inspect solder joints only if the board stops charging.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。