暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 16GB 4800MHz CL40 1Rx8 1.1V 288-Pin Supermicro H14DST-FL memory upgrade

SKU CH-R9PJ-6E8XA

16 GB DDR5 ECC registered DIMM running at 4800 MHz CL40 for Supermicro H14DST-FL servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

他に 30点の構成を表示
  • Exact-match 16 GB DDR5-4800 RDIMM installs at rated speed
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation keeps power draw low in dense configs
  • 1Rx8 single-rank layout enables full population on H14DST-FL
  • 288-pin form factor fits the Supermicro board without adapters

Targeted server upgrade

This 16 GB DDR5 ECC RDIMM is built as an exact-match upgrade for the Supermicro H14DST-FL motherboard. It delivers registered, single-rank memory that the board’s controller recognises at full capacity and rated speed without manual tuning.

Thermals and power draw

Operating at 1.1 V with no heat spreader, the module relies on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw low and stable when all slots are populated.

Replaces slower or smaller DIMMs

Swapping out lower-capacity or slower DDR5 RDIMMs with this CL40 4800 MT/s kit adds bandwidth and ECC protection in a single step. The jump is worth it when your workload needs maximum registered DIMM density per channel and verified compatibility with the H14DST-FL population rules.

特長

  • Exact-match 16 GB DDR5-4800 RDIMM installs at rated speed
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation keeps power draw low in dense configs
  • 1Rx8 single-rank layout enables full population on H14DST-FL
  • 288-pin form factor fits the Supermicro board without adapters

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288-pin DDR5 RDIMM in my Supermicro H14DST-FL, and which slot-population rule do people miss?

Power down, open the chassis, and insert the module into the slot specified by the motherboard manual for the first DIMM per channel; the step most often missed is following the exact population sequence the manual lists for Registered ECC memory.

What maintenance or replacement will this 16GB DDR5-4800 CL40 1Rx8 module need over its service life?

No scheduled maintenance is required; if a future capacity increase is needed, add identical 1Rx8 Registered ECC modules that match the 1.1V voltage and CL40 timing to keep all channels running at 4800 MT/s.

What is the first limit that appears when this RDIMM runs sustained workloads at 4800 MT/s?

The registered buffer and ECC logic keep signal integrity at the rated 4800 MT/s transfer rate, so the practical ceiling is the 16 GB capacity per module before you must populate additional slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。