暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM MR38400-4828K1 48GB DDR5 4800 CL40 1.1V 2Rx8 ECC Registered RDIMM memory upgrade

SKU CH-192Y-5J6HN

48 GB DDR5 4800 RDIMM with ECC and registered buffering for Supermicro H14DSH servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 48 GB capacity scales memory-intensive workloads on supported Supermicro servers
  • Registered ECC design corrects single-bit errors to protect data integrity under full load
  • DDR5 4800 CL40 timing matches the motherboard's memory controller specification exactly
  • 1 V operating voltage reduces power draw per module in dense configurations
  • 288-pin RDIMM form factor fits the required slot type for verified compatibility

Exact-match server upgrade

This 48GB DDR5-4800 RDIMM delivers the precise 2Rx8 registered ECC configuration that the Supermicro H14DSH memory controller expects. It operates at 1.1V with CL40 timing so the module is recognised at full capacity and runs at its rated speed without manual tuning.

Build integration

The 288-pin registered form factor is the only type the H14DSH accepts; UDIMM or SODIMM modules will not fit or function. Registered architecture offloads the memory controller, allowing every supported slot to be fully populated while ECC corrects single-bit errors before they reach production workloads.

Thermals and power

Bare modules without a heat spreader rely on chassis airflow directed across the DIMM slots, a standard design in 1U and 2U server enclosures. At 1.1V the kit draws minimal power per module, keeping thermal load low even when all channels are populated at the rated 4800 MT/s.

特長

  • 48 GB capacity scales memory-intensive workloads on supported Supermicro servers
  • Registered ECC design corrects single-bit errors to protect data integrity under full load
  • DDR5 4800 CL40 timing matches the motherboard's memory controller specification exactly
  • 1 V operating voltage reduces power draw per module in dense configurations
  • 288-pin RDIMM form factor fits the required slot type for verified compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.1V operating voltage of this DDR5 RDIMM stay stable under sustained server workloads?

The module is rated for 1.1V and uses registered ECC architecture, which buffers the signal to the memory controller and helps maintain stability when all slots are populated.

How much heat does this 48GB DDR5 4800 CL40 module generate during continuous operation?

It has no heat spreader and runs at the standard 1.1V for DDR5, so thermal output is typical for a registered DIMM at this speed and density.

Does my Supermicro H14DSH motherboard need a specific BIOS version or CPU to recognise this 2Rx8 registered ECC memory?

The module is verified for the Supermicro H14DSH; consult the board manual for supported capacities, population order and any required firmware updates.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。