저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
White rectangular wall adapter with Micro USB cable and inline on/off switch

Micro Connectors

Micro Connectors RAS-PWR03-PI 5V 2.5A Micro USB power adapter with on/off switch

SKU CH-KTKZ-E4YZC MPN RAS-PWR03-PI

A 5V 2.5A Micro USB power adapter with a built-in on/off switch, UL and FCC approved, DoE Level VI efficiency, and over-voltage and short-circuit protection for Raspberry Pi boards

  • FeaturesSpecifications: Input: AC 100-240V / 50-60 Hz Output: DC 5V
  • Stable 5 V 2.5 A output powers Raspberry Pi reliably
  • Built-in on/off switch removes need to unplug cable
  • UL and FCC approved for certified safety
  • DoE Level VI efficiency meets energy standards
  • Over-voltage and short-circuit protection guards connected hardware

Power adapter with on/off switch

This Micro Connectors 5V 2.5A Micro USB power adapter delivers a stable 12.5W output for Raspberry Pi boards and similar development devices. The integrated on/off switch lets you cycle power without unplugging the cable, reducing connector wear during frequent restarts. UL and FCC approvals plus over-voltage and short-circuit protection provide safe operation across 100-240V AC mains.

Thermals noise and power draw

The adapter meets DoE Level VI efficiency standards, limiting no-load and active-mode waste heat during continuous use. A 47-inch cable allows flexible placement away from the power strip, keeping the brick clear of other equipment. With a weight of 0.25 lb the unit adds negligible load to a bench or enclosure mount.

Upgrades from basic USB chargers

Makers who have relied on generic phone chargers gain a dedicated 2.5A supply rated for the full load of a Raspberry Pi 3, Pi 2, Pi 1 or Pi Zero. The inline switch eliminates the need to pull the Micro USB plug for every reboot, preserving the board's power port. Builders needing higher current for Pi 4 or USB-C devices should select a different adapter.

주요 특징

  • Stable 5 V 2.5 A output powers Raspberry Pi reliably
  • Built-in on/off switch removes need to unplug cable
  • UL and FCC approved for certified safety
  • DoE Level VI efficiency meets energy standards
  • Over-voltage and short-circuit protection guards connected hardware

사양

BrandMicro Connectors
ModelRAS-PWR03-PI
FeaturesSpecifications:
Input: AC 100-240V / 50-60 Hz
Output: DC 5V / 2.5A
Cable length: 47 inches (3.9 feet)
Weight: 0.25 lb.
Features:
UL and FCC Approved
Convenient ON/OFF Switch
DoE Level VI Efficiency
Over Circuit Protection
Short Circuit Protection
Compatible with all Raspberry Pi
Micro-USB connector
배송 무게0.09 kg
포장 크기157 × 64 × 38 mm

이 상품에 대한 질문

How do I connect the Micro Connectors RAS-PWR03-PI to my Raspberry Pi without damaging the Micro USB port?

Plug the Micro USB connector into the Pi's power input, then use the inline on/off switch to control power instead of repeatedly unplugging the cable. The 47 inch cable provides enough length to position the adapter conveniently.

Will the cable or switch on the RAS-PWR03-PI wear out and need replacement?

The built-in on/off switch is designed to handle daily power cycling so the Micro USB connector does not take mechanical stress. The 3.9 foot cable is fixed to the adapter and not user-replaceable.

At what load does the RAS-PWR03-PI hit its thermal or current limit during sustained use?

The adapter delivers up to 2.5A at 5V (12.5W) continuously. Over voltage and short-circuit protection will activate if the connected draw exceeds the rated output or a fault occurs.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.