저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
White Micro ATX case with leather strap, tempered glass side and four 120mm fans

Montech

Montech Heritage PRO White Micro ATX PC Case

SKU CH-X2RA-VPKAG

A compact Micro ATX case with steel, leather and tempered glass panels, four pre-installed PWM fans, support for a 360 mm radiator and a leather strap rated for 40 kg

  • TypeMicro ATX/Mini ITX (Backplane)
  • ColorWhite
  • Case MaterialSteel / Leather / Tempered Glass
  • Motherboard CompatibilityMicro ATX / Mini-ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1

Options Heritage PRO White

취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Heritage PRO White Micro ATX Case

The Montech Heritage PRO White is a Micro ATX and Mini-ITX backplane chassis finished in white steel, leather and tempered glass. It targets builders who want a compact, portable case with a distinctive eco-leather aesthetic and integrated carry strap for LAN events or frequent moves.

Suits portable showcase builds; not for E-ATX boards

This case suits gamers and creators who prioritise style, portability and the ability to carry a complete system by its leather strap. Builders needing E-ATX motherboard support, more than two 3.5-inch drive bays or a standard layout without a backplane should look at larger alternatives.

Backplane layout with 360 mm top radiator support

The defining specification is the backplane motherboard orientation combined with top-mounted radiator support up to 360 mm. This layout dictates component clearance, cable routing paths and the simultaneous fit of an ATX power supply plus a 40-series graphics card.

주요 특징

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

사양

BrandMontech
ModelHeritage PRO White
TypeMicro ATX/Mini ITX (Backplane)
ColorWhite
Case MaterialSteel / Leather / Tempered Glass
Motherboard CompatibilityMicro ATX / Mini-ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots5
Fan OptionsSide:120mm*2 , Top:120*3/140*2, Bottom: 120*3,
Rear: 120*1
Radiator OptionsTop - Up to 360mm
120mm Fans4x 120 PWM Fans
배송 무게8.71 kg
포장 크기559 × 457 × 318 mm

이 모델의 다른 버전

같은 라인업에서 1개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How often should the four 120mm PWM fans be cleaned or replaced for sustained airflow?

Dust the four 120mm PWM fans every few months; replace any fan that develops bearing noise or reduced RPM.

Which thermal limit appears first when a 360mm radiator runs at full load for hours?

The 360mm top radiator can exhaust the heat from a 40-series GPU and CPU, but case airflow becomes the bottleneck before coolant temperature peaks.

How loud is the system with three reverse fans and one standard fan spinning all day?

The four 120mm PWM fans run quietly at low speed and ramp up only under heavy load, keeping noise low during typical all-day use.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.