저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Small green circuit board with 25 square RGB LEDs in a 5 by 5 grid, 15 by 15 millimetre active area, 3.5 millimetre pitch

Pimoroni

Pimoroni PIM435 5x5 RGB Matrix Breakout development board

SKU CH-N71F-WXBGS

A 5x5 RGB LED matrix breakout with 25 individually addressable pixels controlled via I2C at addresses 0x74 or 0x77, compatible with Raspberry Pi and Arduino

  • 25 RGB LEDs visualise sensor data in a compact grid
  • IS31FL3731 driver chip controls each LED individually over I2C
  • Works with 3.3 V or 5 V logic without extra level-shifting
  • Cuttable trace changes I2C address from 0x74 to 0x77 for dual-matrix projects
  • Python library and examples included for Raspberry Pi and Arduino

5x5 RGB Matrix Breakout

The Pimoroni PIM435 is a compact development board that carries a 5x5 grid of RGB LEDs driven by an IS31FL3731 chip. It connects through I2C at address 0x74, with a cuttable trace to shift to 0x77. The board works at 3.3 V or 5 V and includes reverse polarity protection. A Python library and examples are supplied for Raspberry Pi and Arduino.

Makers visualising sensor data

This board suits hobbyists who want a small, addressable display for environmental readings such as temperature or pressure from compatible sensors. It plugs directly onto the bottom-left GPIO pins of any Raspberry Pi model once the included right-angle female header is soldered. Builders needing higher resolution graphics, video output, or wireless connectivity should consider other display options.

Dual-matrix I2C address selection

The single specification that decides fit is the selectable I2C address: the default 0x74 can be changed to 0x77 by cutting a trace on the board. This allows two matrices to share the same bus without conflict. If your project requires only one matrix or uses a different address scheme, the feature is optional but does not prevent use.

주요 특징

  • 25 RGB LEDs visualise sensor data in a compact grid
  • IS31FL3731 driver chip controls each LED individually over I2C
  • Works with 3.3 V or 5 V logic without extra level-shifting
  • Cuttable trace changes I2C address from 0x74 to 0x77 for dual-matrix projects
  • Python library and examples included for Raspberry Pi and Arduino

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

What does the 25 RGB LED count mean for real-world display capability?

The 5x5 grid provides 25 individually addressable RGB LEDs in a 15x15mm active area with 3.5mm pitch, suitable for simple graphics, sensor readouts or scrolling text.

How does the I2C interface at addresses 0x74 or 0x77 affect connecting multiple boards?

The IS31FL3731 driver uses I2C at 0x74 by default; cutting the onboard trace changes it to 0x77 so two matrices can share the same bus without address conflict.

What physical mounting does the included right-angle female header provide for a Raspberry Pi?

Solder the supplied right-angle female header to the breakout, then press it onto the bottom-left five GPIO pins (1, 3, 5, 7, 9) for a direct, solderless Pi connection.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.