We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 16GB (2x8GB) DDR4 2400 ECC SODIMM CL17 1.2V laptop RAM

SKU CH-YGKF-MHMNS

Dual-channel 16 GB kit of DDR4 2400 ECC SODIMM memory with CL17 latency and 1.2 V operation for compatible laptops and microservers

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16GB (2 x 8GB)
  • 8GB
  • ECC protection guards data integrity in critical workloads
  • Dual-channel 16 GB kit speeds multitasking throughput
  • DDR4 2400 CL17 modules deliver responsive system performance
  • 2 V JEDEC voltage lowers power draw and heat
  • 260-pin SODIMM form factor fits compatible laptop slots

ECC SODIMM kit for mobile workstations

This 16 GB dual-channel kit provides two 8 GB DDR4 2400 modules with error-correcting code for data integrity. Unbuffered 260-pin SO-DIMMs operate at the standard 1.2 V and carry a CL17 latency rating. The modules are designed for laptops, microservers and NAS units that specifically support ECC SODIMM memory.

Systems needing ECC on SO-DIMM slots

Builders whose platforms accept DDR4 ECC unbuffered SO-DIMMs will gain the protection against single-bit errors that standard laptop memory lacks. Buyers whose machines only support non-ECC SODIMMs or require registered DIMMs cannot use this kit and should look elsewhere.

16 GB capacity with dual-channel headroom

Two single-rank 8 GB sticks fill two slots and enable dual-channel bandwidth for typical workloads and moderate virtualization. The 16 GB total suits many mobile workstation tasks, while heavier database or virtualization loads may exhaust the available capacity.

Highlights

  • ECC protection guards data integrity in critical workloads
  • Dual-channel 16 GB kit speeds multitasking throughput
  • DDR4 2400 CL17 modules deliver responsive system performance
  • 2 V JEDEC voltage lowers power draw and heat
  • 260-pin SODIMM form factor fits compatible laptop slots

Specifications

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 1Rx8 PC4-19200 ECC SODIMM
Part NumberNE-SS-0613
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my laptop need a DDR4 260-pin SODIMM slot that supports ECC unbuffered memory for this kit to work?

Yes, this kit requires a DDR4 260-pin SODIMM slot with ECC unbuffered support; standard non-ECC laptop slots will not enable the error-correction feature.

Can I add these CL17 1Rx8 modules alongside existing DDR4 2400 non-ECC SODIMMs in the same system?

Mixing ECC unbuffered modules with non-ECC memory is not supported; the system will typically disable ECC or fail to boot, so all slots should use matching ECC unbuffered modules.

How do I confirm the kit is running at DDR4 2400 with ECC active after installation?

Check the BIOS memory information or use a tool like CPU-Z to verify 2400 MT/s speed, CL17 timings, 1.20 V voltage, and that ECC status shows enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.