SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Athena Power
A 700 W single 1U server supply with dual 40 mm fans, active PFC and 80 %+ efficiency for 1U rackmount systems
The Athena Power AP-1U70P868 is a single 700W supply built for 1U rackmount chassis. It delivers +3.3V@18A, +5V@20A and dual 12V rails at 28A each, plus -12V and +5Vsb outputs. The unit accepts 90-264V input at 47-63Hz and meets IEC/UL/CSA/EN 62368-1 safety standards for deployments in the United States, Canada and Europe.
Two 40mm ball-bearing fans pull air from the front and exhaust it at the rear, while a smart controller adjusts speed to the internal heat load. Installation uses the standard 200mm depth and four mounting screws; the 20+4 pin main connector, one EPS 8-pin and one 8(4+4) pin CPU cables, two PCIe 6+2 pin, three SATA and two Molex leads are all fixed. Verify cable reach in deeper chassis before fitting.
Confirm the rack can accommodate 200mm length and that the motherboard requires both an 8-pin and an 8(4+4) pin EPS connector. The supply provides only two PCIe 6+2 pin plugs, so GPUs needing more must be excluded. Input current draws 9.0A at 110V or 4.5A at 240V; ensure the PDU circuit can sustain that load. No redundant module is present.
| Brand | Athena Power |
|---|---|
| Model | AP-1U70P868 |
| Type | 1U EPS |
| Single/Redundant | Single |
| Maximum Power | 700W |
| Main Connector | 20+4Pin |
| Output Current | +3.3V@18A, +5V@20A,12V1/V2@28/28A, [email protected] , [email protected] |
| Output | +3.3V, +5V,12V1/V2, -12V, +5Vsb |
| Input Voltage | 90 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 9.0A@110V, 4.5A@ 240V |
| MTBF | 250,000 Hours on Maximum Load at +25 degree C |
| Efficiency | > 80% |
| Hold-up Time | 11 ms Minimum at Nominal Input Voltage |
| Protection | OCP, OVP, |
| Features | Rise time: Less than 70 ms |
| Dimensions | (L x W x H) 200 x 100 x 40.5 mm/ 7.87 x 3.94 x 1.59 in |
| Weight | 4.50 lbs |
| Humidity | 20%-90% |
| Temperature | Operating: 0°C ~ +55°C on Full Load; Storage & Shipping: -40°C ~ +70°C |
Verify the dual 40 mm fans spin up, the main 20+4 pin and EPS 8-pin connectors deliver stable voltages, and the unit stays within the 0 °C to 55 °C operating range under load.
The box includes one 20+4 pin ATX, one EPS 12V 8-pin, one 8 (4+4) pin, two PCIe 6+2 pin, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin connector; any extra SATA or PCIe cables must be purchased separately.
Select the single 700 W model with both the EPS 12V 8-pin and the 8 (4+4) pin connectors, which together provide full support for dual-processor configurations.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?