DELL PowerEdge M640 Blade Server 2x Xeon Gold 6230 2.1GHz 20C 64GB DDR4 2x 960GB SAS H330 57810S-K iDRAC9 Ent
- Blade
- Blade
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
DELL
Half-height blade server with dual 20-core Xeon Gold 6230 processors, 32GB DDR4, dual 1.92TB SSDs, PERC H330 RAID and iDRAC9 Enterprise management
SSD (Installed) 2 x 1.92TB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute workloads such as virtualisation, private cloud and high-performance computing. Two Intel Xeon Gold 6230 processors provide 20 cores each at 2.1 GHz with 3.9 GHz turbo. The system ships with 32 GB of DDR4 2666 MHz registered ECC memory across four modules.
A Dell PERC H330 storage controller supports SATA and SAS drives with RAID levels 0, 1, 5, 10 and 50. Two 1.92 TB SATA SSDs are installed in the 2.5 inch bays. The Broadcom 57810S-K daughter card adds dual-port 10 Gb Ethernet connectivity. The blade fits PowerEdge MX and M1000e chassis for scalable deployment.
iDRAC9 Enterprise delivers comprehensive remote management and automation for simplified administration. The unit includes the front bezel and ready rails are not included. No operating system is pre-installed, allowing immediate configuration for the target environment.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 20-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 32GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 1.92TB SATA SSD |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The PERC H330 is a 12Gb/s SAS/SATA controller, so SATA SSDs run at their native 6Gb/s limit.
It is a half-height blade with two 2.5-inch drive bays, compatible with PowerEdge MX and M1000e chassis.
Slide the blade into an empty half-height slot until the latch clicks, then use iDRAC9 Enterprise to complete BIOS and RAID setup — skipping the iDRAC configuration leaves the server unmanaged.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?