We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue duplex multimode fibre patch cable with ST connectors, 25m length, 3.0mm jacket

Enfain

Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 25m Aqua Blue

SKU CH-46DY-CHE6V

A 25 m aqua OM3 duplex patch cord with ST connectors, 3.0 mm jacket, ceramic ferrules, 850 nm wavelength, .2 dB typical insertion loss and >38 dB return loss for 10 Gbit links

Length 25m

  • Supports 10 Gb/s links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • Return loss above 38 dB reduces reflected light
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Enfain OM3 ST-ST Duplex Cable

The Enfain OM3 ST-ST duplex multimode fibre optic cable is built for 10G gigabit links in switches, servers and data centres. It uses a 3.0 mm PVC jacket with ceramic ferrules and an aqua blue colour code for quick identification. The 25 metre length suits rack-to-rack or cross-connect runs.

OM3 10G core capacity and headroom

The OM3 10-gigabit core supports 1G, 10G and 40G compatible transmission at 850 nm wavelength. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB, while return loss exceeds 38 dB. Bandwidth headroom ends at the rated 40G compatibility and the 25 metre reach.

Thermals noise and power draw

Passive glass fibre generates no heat and produces no audible noise during operation. The cable draws no electrical power and operates reliably from -20°C to +60°C. A 330 mm bending radius and 1000 insertion cycles ensure durable handling in normal use.

Highlights

  • Supports 10 Gb/s links with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss preserves signal strength
  • Return loss above 38 dB reduces reflected light
  • 0 mm PVC jacket rated for 1000 mating cycles
  • Operates from -20 °C to +60 °C for data-centre use

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the ST connectors on this OM3 cable mate with the older ST patch panels we already have in the rack?

Yes, the duplex ST connectors follow the standard interface used on legacy panels, so they will plug directly into your existing ST bulkheads without adapters.

How can I verify the link is performing to the rated 0.2 dB typical insertion loss after installation?

Use a light source and power meter at 850 nm; a measured loss at or below 0.3 dB confirms the cable meets its maximum specification.

Does the 25 m aqua-blue cable ship with dust caps or protective boots, or must I order them separately?

The cable arrives with protective caps on both ceramic ferrules; no extra accessories are required for immediate deployment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.