Kingston Technology Corp. SNV3S/500G internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
Compact M.2 2230 drive stores 1TB and delivers up to 6000 MB/s reads over PCIe 4.0 x4
Style 2230
The SNV3SM3/1T0 fits the 22 by 30 millimetre footprint required by thin ultrabooks and handheld consoles. Its 2.30 millimetre height clears low-profile motherboard slots without a heatsink. Consumer workloads such as OS boot, game loads and media editing all run on the PCIe 4.0 x4 NVMe interface. The single-sided layout keeps installation simple in cramped chassis.
Kingston ships the drive alone — no screws, no cloning software, no thermal pad. You supply the M.2 standoff and any cooling the platform demands. The bare PCB weighs 2.8 grams, so it adds negligible mass to a portable device. Firmware updates, if needed, come from the Kingston support site rather than a packaged utility.
The controller tops out at 6000 megabytes per second on large-block reads and 4000 megabytes per second on writes. That ceiling decides whether the drive saturates a PCIe 4.0 x4 link in your target system. MTBF is rated at 2000000 hours and the operating range spans 0 to 70 degrees Celsius. If your workload needs sustained throughput above those figures, look at a higher-tier model.
| Brand | Kingston |
|---|---|
| Series | SNV3SM3 |
| Model | SNV3SM3/1T0 |
| Part Number | SNV3SM3/1T0 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2230 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 6000 MBps |
| Max Sequential Write | Up to 4000 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 2.30mm |
| Width | 30mm |
| Depth | 22mm |
| Weight | 2.8g |
| Shipping weight | 0.02 kg |
| Package size | 114 × 103 × 8 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 3D NAND is rated for a 2,000,000-hour MTBF, so no scheduled replacement is expected within that period under normal consumer workloads.
Sequential write performance tops out at 4,000 MBps, which is the practical ceiling once the SLC cache fills during long transfers.
Operating temperature is rated 0 °C to 70 °C; the drive will throttle before exceeding 70 °C even without a heatsink.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?