We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for Supermicro X14SAE-F memory upgrade

SKU CH-F4GA-BHZXH

128 GB DDR5 kit in four 32 GB UDIMM modules running at 5600 MHz CL46 1.1 V for Supermicro X14SAE-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • CL46 CAS latency at 1.1 V for efficient operation
  • 2Rx8 dual-rank unbuffered UDIMM layout matches board requirements
  • Built with Samsung, Micron or Hynix chips and tested for stability

128GB DDR5 kit for Supermicro X14SAE-F

This 128GB kit contains four 32GB DDR5 UDIMMs rated at 5600MHz with CL46 latency and 1.10V operation. The 2Rx8 unbuffered non-ECC modules match the memory controller expectations of the Supermicro X14SAE-F motherboard for full-capacity recognition at rated speed.

Sustained-load behaviour with major OEM chips

Built with Samsung, Micron or Hynix components, the modules are tested for stability at the rated 5600MHz speed, CL46 timing and 1.10V voltage during extended workloads. The 288-pin UDIMM form factor ensures consistent electrical contact without the heat spreader that some server configurations prohibit.

Replaces lower-capacity or slower DDR5 kits

The upgrade is worthwhile when the board currently runs less than 128GB or operates at a lower DDR5 data rate, allowing the four-slot population to deliver the full 128GB at 5600MHz. It does not suit systems requiring ECC, registered DIMMs, SODIMM form factors or a different DDR generation.

Highlights

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • CL46 CAS latency at 1.1 V for efficient operation
  • 2Rx8 dual-rank unbuffered UDIMM layout matches board requirements
  • Built with Samsung, Micron or Hynix chips and tested for stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.10V 128GB kit draw when the system runs all day?

Each module operates at 1.10 volts, the standard DDR5 voltage, so total power scales with the 128GB capacity and your workload rather than exceeding the platform's baseline.

What motherboard slot and chipset combination is required for this 288-pin DDR5 kit?

The kit needs a Supermicro X14SAE-F motherboard with DDR5 5600 support; the 288-pin UDIMM form factor and 2Rx8 organisation must match the board's approved memory population rules.

Can I mix this 2Rx8 CL46 kit with other DDR5 DIMMs of different rank or latency?

Mixing ranks or timings is not recommended; the motherboard validates the exact 2Rx8 CL46 specification at 5600 MT/s, so adding dissimilar modules may prevent the full 128GB from running at rated speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.