NEMIX RAM 128GB (2×64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128 GB DDR5 4800 CL40 2Rx4 ECC registered RDIMM validated for Supermicro H14SST-G motherboards
Size 128GB
This 128 GB DDR5 4800 RDIMM delivers the precise 2Rx4 registered ECC configuration the H14SST-G memory controller expects. It installs in the board's 288-pin slots at 1.1 V and CL40 so the system recognises full capacity and runs at rated speed without manual tuning.
Registered architecture offloads the controller to allow full-slot population at 4800 MT/s while ECC corrects single-bit errors on the fly. The 2Rx4 organisation and 1.1 V operation are fixed by the DDR5 4800 standard, so the module cannot run at higher speeds or lower latencies than the platform defines.
The single specification that determines compatibility is the 2Rx4 registered ECC layout. Boards that require UDIMM, SODIMM, unbuffered, non-ECC or a different rank structure will not accept this module; only systems validated for 2Rx4 RDIMM at DDR5 4800 should use it.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 128GB 2Rx4 Registered ECC module matches the board's DDR5 4800 spec, 1.10V voltage and CL40 timing. Consult your motherboard manual for supported capacities and the approved population order before deciding.
The module runs at the rated 4800 MT/s with CL40 latency at 1.10V. Registered buffering lets every slot operate fully populated at that speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
Yes — the board requires 288-pin DDR5 RDIMMs, not UDIMMs or SODIMMs. The Registered design offloads the memory controller so all slots can run at the full 128GB capacity and 4800 MT/s without signal degradation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?