NEMIX RAM 16GB (2×8GB) DDR5 5600 CL46 1.1V 288-pin UDIMM Kit for Supermicro X14SAE
- 16GB (2 x 8GB)
- 288-Pin DDR5 UDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB DDR5-5600 dual-channel kit with CL46 timing and 1.1 V operation, validated for Supermicro X13SAE-F motherboards
Size 16GB 2X8GB
This 16 GB kit contains two 8 GB DDR5 5600 modules rated CL46 at 1.1 V. The 288-pin UDIMM format matches the board’s unbuffered non-ECC slots. It is built for owners of that specific Supermicro motherboard who need a verified, plug-and-play capacity increase.
Confirm the X13SAE-F memory population rules and maximum supported capacity per slot. Verify that your BIOS revision recognises 1Rx8 unbuffered DDR5 at 5600 MT/s. Ensure all slots you plan to fill accept 288-pin UDIMMs and that no ECC or registered modules are already installed.
Swapping lower-speed DDR5 or a single 8 GB stick for this matched pair restores dual-channel bandwidth and raises total capacity to 16 GB. The jump is worth it when the system currently runs below 5600 MT/s or has less than 16 GB installed. It does not suit builds that require ECC, registered DIMMs or SODIMM form factors.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The package contains only the two 8 GB DDR5 5600 CL46 1.1 V 288-pin UDIMM modules; no heat spreaders, cables or tools are included.
This exact 2×8 GB, 1Rx8, CL46, 1.10 V configuration matches the Supermicro X13SAE-F motherboard's validated population rules, ensuring full-speed recognition at DDR5 5600.
The memory controller will run the kit at 5600 MT/s with CL46 timings at 1.10 V, delivering the standard PC5-44800 bandwidth the board expects.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?