We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 RDIMM module with black chips on both sides, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 ECC RDIMM 288-pin Dell PowerEdge R7525 memory upgrade

SKU CH-AYPQ-5G4QT

16GB DDR4 3200 ECC RDIMM registered memory for Dell PowerEdge R7525 servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 ECC RDIMM boosts server capacity
  • CL22 latency and 1.2V operation keep power draw low
  • 2Rx8 registered design adds signal integrity for heavy workloads
  • 288-pin form factor fits Dell PowerEdge R7525 slots
  • Samsung Micron Hynix chips deliver enterprise-grade reliability

Dell PowerEdge R7525 upgrade

This 16 GB DDR4 module is built for the Dell PowerEdge R7525 rack server. It delivers registered ECC memory for workloads that require error correction and signal integrity. System administrators upgrading compatible Dell platforms will find the rated speed and latency match the server specifications.

Registered RDIMM with ECC

The 288-pin RDIMM uses a registered buffer and 2Rx8 organisation to reduce electrical load on the memory controller. ECC circuitry detects and corrects single-bit errors during operation. No heat spreader is fitted, so airflow in the server chassis manages module temperature directly.

DDR4 3200 interface limits

The DDR4 3200 standard caps transfer rates at 3200 MT/s and bandwidth at PC4-25600. CL22 latency is fixed by the module SPD and cannot be tightened without exceeding specification. Registered signalling adds one clock cycle of delay compared with unbuffered modules. Voltage is fixed at 1.20 V.

Highlights

  • 16GB DDR4 3200 ECC RDIMM boosts server capacity
  • CL22 latency and 1.2V operation keep power draw low
  • 2Rx8 registered design adds signal integrity for heavy workloads
  • 288-pin form factor fits Dell PowerEdge R7525 slots
  • Samsung Micron Hynix chips deliver enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What DDR4 speed and PC rating does this 16GB module run at?

This module operates at DDR4 3200 with a PC4-25600 rating, delivering 16GB of registered ECC memory at 1.2V for Dell PowerEdge R7525 servers.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a standard 288-pin DDR4 RDIMM slot in the Dell PowerEdge R7525; the registered 2Rx8 design has no heat spreader and uses a single 16GB stick.

How is this ECC RDIMM installed in the R7525 and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the ejector clips lock, then verify the new 16GB appears in the BIOS memory configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.